Renovation of a fire / police facility in Warrenton, Missouri. Completed plans call for the renovation of a 1,189-square-foot fire / police facility.

Request for Proposals Epoxy Flooring Installation Station 2 the Warrenton Fire Protection District (Wfpd) is Requesting Proposals From Qualified Contractors for the Installation of a High Performance Epoxy Flooring System at Fire Station 2, Located at 26625 S. State Highway 47, Warrenton, Missouri 63383. The Project Includes Surface Preparation and Installation of a Durable, Slip Resistant Epoxy Flooring System Designed for Heavy Traffic, Chemical Resistance, and Long Term Durability, While Maintaining Fire Station Operations. RFP Issued: June 28, 2026 Warrenton Fire Protection District Reserves the Right to Reject Any or All Proposals, Waive Informalities, Request Additional Information, Negotiate With Proposers, or Cancel the RFP at Any Time. Anticipated Award: July 21, 2026 *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com. Project Scope of Work The contractor shall provide all labor, materials, tools, equipment, and supervision required to complete the epoxy flooring installation including, but not limited to: Surface Preparation Mechanical grinding or shot blasting of existing concrete surface Removal of contaminants, coatings, grease, or debris Crack and joint repair where necessary Moisture testing of concrete substrate if applicable Epoxy Flooring Installation Application of epoxy primer Application of base coat Optional broadcast of aggregate or decorative flakes (if specified) Application of topcoat or clear protective coat Installation of slip-resistant additives where required Performance Requirements The installed flooring system must: Be resistant to chemicals, oil, and fuel Provide slip resistance for safety Be easy to clean and maintain Meet manufacturer specifications for thickness and curing time