Site work and paving for a road / highway in Garner, North Carolina. Completed plans call for site work for a road / highway.

Work will include resurfacing streets and other improvements associated with the milling and resurfacing of streets, along with the installation of two speed tables and one raised crosswalk to include curb ramps, signage, and striping. The Contractor is responsible for the full scope of work as outlined in Appendix. Separate sealed bids will be received for the furnishing of all labor, material, equipment, supplies, and supervision for the construction of the project. Pavement Milling (1.5" depth) , Pavement Milling (3" depth) , 1.5" S9.5B Bituminous Surface Course (Resurfacing), 3" S9.5B Bituminous Surface Course (Resurfacing), Pavement Removal & Replacement (2" I19.0C) , Pavement Removal & Replacement (4" I19.0C) , Water Valve Adjustment (Labor Cost Only) , Manhole Lid Adjustemt (Labor Cost Only), Incidental Asphalt Base Course Type B25.0C, Remove Replace Curb and Gutter , Remove/Replace Sidewalk, Install Asphalt Speed Table (includes Thermoplastic Sharks Teeth Arrows), Install 30x30 "Speed Humps" Warning Sign w/ 12x18 "20mph" yellow placard, and U-channel post , Raise Crosswalk (with striping, curb wramps, signage,drainage grates, NCDOT Rebounding bollards) , 4" Thermoplastic Markings (90 MIL), 4" Thermoplastic Markings (120 MIL) , 24" Thermoplastic Markings , Thermoplastic Turn Arrows Question Deadline 05/15/2026 at 12:00 PM ET All questions concerning this bid should be directed to: Branyun Bullard bbullard@garnernc.gov Final Addendum Issued May 18, 2026 MBE (10%)