Site work and paving for a road / highway in County of Grande Prairie No. 1, Alberta. Completed plans call for site work for a road / highway.

Mall Access & 99 St (Site B1) - Complete replacement of traffic signal. New installations include - traffic signal (TS) cabinet with UPS, power distribution (PD) cabinet, 2 cabinet bases, 3 patio blocks, 4 signal poles (9m, 9m, 11m, 11m) with bases, one (1) Wavetronic XP21Radar Detector system, 11 signal heads, 4 ped signal heads, 4 APS pushbuttons, 11 signs, 4 junction boxes (JB), 73m trenched conduits, 78m pushed conduits, completely new field wiring (entire intersection), install 2 salvaged Encore cameras. Removals include - TS cabinet & base, 5 signal poles w/ fixtures, 5 pole bases, 6 JBs, pull out all existing cables (through approx. 156m of conduit runs). Reinstatement of 7 sq.m of concrete sidewalk / asphalt trail. 84 Ave & Mission Heights Dr (Site B2) – New installations include - TS cabinet w/ UPS, PD Cabinet, 2 cabinet bases, 3 patio blocks, 66m trenched conduits, 92m pushed conduits, 1 pedestal pole, 5 JBs, completely new field wiring (entire intersection). The existing camera hardware inside the salvaged TS cabinet shall be salvaged and installed in the new TS cabinet. Removals include - TS cabinet & base, 5 JBs, pull out all existing cables (through approx. 184m of conduit runs), salvage & re-install 1 ped signal head and 1 pushbutton. Reinstatement of 2 sq.m of asphalt trail. Note: The existing luminaires and the existing cable connecting from the handhole to the luminaires shall remain in place. They shall be spliced to the new streetlight cable to be pulled into the handholes. 100 Ave & 106 St (Site B3) – New installations include - TS cabinet w/ UPS, PD cabinet, 2 cabinet bases, 3 patio blocks, 1 streetlight davit w/ luminarie, 37m trenched conduits, 32m pushed conduits, 4 JBs, completely new field wiring (entire intersection). The existing camera hardware inside the salvaged TS cabinet shall be salvaged and installed in the new TS cabinet. Removals include - TS cabinet & base, 4 JBs, pull out all existing cables (through approx. 135m of conduit runs). Reinstatement of 15 sq.m of concrete slab in traffic island). Note: The existing luminaires and the existing cable connecting from the handhole to the luminaires shall remain in place. They shall be spliced to the new streetlight cable to be pulled into the handholes. 100 Ave & 98 St (Site B4) – New installations include – Weld repair 99 Ave & 98 St (Site B5) – New installations include – new pole trunk (vertical pole shaft – for 15m mast arm), install salvaged mast arm, streetlight davit and attached fixtures, luminaire and camera. Re-aim camera. Removal – Salvage cantilever combination pole with 12m mast arm, streetlight davit, luminaire and attached fixtures including 1 camera). 68 Ave & 100 St (Site B6) – New installations include – TS cabinet w/ UPS, 1 cabinet base, 2 patio blocks, 46m trenched conduits, 4 JBs, new field wiring through newly installed conduits. The existing camera hardware inside the salvaged TS cabinet shall be salvaged and installed in the new TS cabinet. Removals include – TS cabinet & base, 2 JBs, pull out cables through approx. 33m of conduit runs. Reinstatement of 4.5 sq,m of asphalt trail. 68 Ave & Resources Rd (Site B7) – New installations include – new pole trunk (vertical pole shaft – for 15m mast arm), install salvaged mast arm, streetlight davit and attached fixtures, luminaire and camera. Reaim camera. Removals include – Salvaged cantilever combination pole with 11m mast arm, streetlight davit, luminaire and attached fixtures including 1 camera) 84 Ave & 116 St (Site B8) – New installations include -12m tall camera pole. Install salvaged signal head, camera and sign. S&I NO ENTRY sign. Re-aim camera. Removals include – Remove camera pole with attached fixtures, signs and camera Documents can be obtained from https://cityofgp.bidsandtenders.ca/