Renovation of a military facility in Moody AFB, Georgia. Completed plans call for the renovation of a military facility.

Access Control and Video Monitoring Systems (ACS & VMS) - Access Control System (ACS) and Video Monitoring System (VMS) for the Human Performance Optimization and True North Facility. The 820th Base Defense Group and the 93 Air Ground Operations Wing (AGOW) require the installation of an Access Control System (ACS) and Video Monitoring System in building 207, Human Performance Optimization, at Moody AFB, Georgia. The system must include a computer workstation, Common Access Card (CAC) and PIN (2 factor authentication) devices/readers, and associated camera/video system, all managed by the ACS workstation. The vendor is responsible for providing all necessary parts, equipment, labor, software, removing unnecessary or old parts, and installing all required wiring. The camera monitor and installation information in Section 8 of the Statement of Work is included as an option, to be executed only if additional funding is secured. Bidders must submit a detailed technical approach, completed Insurance Compliance Form with proof of insurance, and a pricing breakdown for both the main scope and the CCTV option. A minimum one-year warranty for workmanship, labor, software, and hardware is required, with a service response time not to exceed three business days after notification. Offers must be complete, self-sufficient, and responsive to the solicitation requirements. Questions Submission Deadline: 17 June 2026, 9:00 AM, EST. Scope and Objective: The 820th Base Defense Group and the 93 Air Ground Operations Wing (AGOW) is requiring the installation of an Access Control System (ACS) and Video monitoring system, located in building 207, Human Performance Optimization, Moody AFB, Georgia. The system shall encompass a computer workstation, Common Access Card (CAC) and PIN (2 factor authentication) devices/readers, and associated camera/video system, all controlled by the ACS workstation. Vendor is expected to supply all necessary parts, equipment, labor, software, remove unnecessary or old parts, and install all necessary wiring. Wiring may be required to be installed within conduit or to be protected from environmental and rodent damage. 1.2 Video Monitoring Extension (CCTV): The Camera Monitor and installation information found in the SOW Section 8 will be added as an option. This option shall be executed only if the required activity is to secure additional funding in the future.