Site work and renovation of a fire / police facility in Saint Clairsville, Ohio. Completed plans call for the renovation of a fire / police facility; and for site work for a fire / police facility.

Installation of a new Level 2 ballistic rating door with hardware, application of mirror/tint film to dispatch windows, and repair/addition of exterior trim and lever handle to the public entry door. Question Deadline 08/11/2026 at 10:00 AM ET Any questions regarding project scope or bid process please contact: Pamela R. Woods Planner, Ohio Department Public Safety 1970 West Broad Street, Suite 428 Columbus, Ohio 43223 +1 (614) 752-7861 PWoods@dps.ohio.gov 1. Project Description Location: [51400 National Rd , St. Clairsville, Ohio 43950] Objective: Install one (1 ) [or number] UL 752 Level 2 certified ballistic-rated swinging door system to provide security against forced entry and high-caliber handgun threats. 2. Scope of Services Demolition/Preparation: Remove existing door, frame, and hardware. Properly dispose of old materials off-site. Prepare the opening for the new steel-reinforced frame. Supply & Fabrication: Door: Provide [Number] UL 752 Level 2 certified wood door (minimum 1.75 inches thick). Frame: Provide heavy-duty steel frame, anchored according to manufacturer requirements to meet UL 752 el frame, anchored according to manufacturer requirements to meet UL 752 standards. Finish: Shop-applied primer, followed by [Specify Paint Finish] to match interior/exterior aesthetics. o Hardware: Install certified high-security hinges (ball-bearing/ballistic rated). Install mortise lockset or panic hardware complying with Ohio life safety codes. Ohio Building Code and Ohio Fire Code (Section 3737.07), ensuring free egress with no more than 15 pounds of force. Panic hardware is mandatory for assembly areas with 50+ occupants, schools, and highhazard rooms. Devices must be mounted 34-48 inches above the floor and allow for one-motion egress. Install threshold and door closer. Installation: Install door and frame plumb and square. Apply ballistic sealant to joints to ensure a complete, gap-free seal. Align and adjust hardware for smooth operation. Site Cleanup: Remove all construction debris and leave the area clean. 3. Compliance & Standards Ballistic Rating: All components must meet or exceed UL 752 Level 2 standards. Codes: Installation must comply with the Ohio Building Code and local fire codes. 4. Deliverables Final inspection and certification of compliance. Manufacturer's warranty information. o Maintenance instructions.