Site work, paving and renovation of a municipal facility in Honolulu, Hawaii. Completed plans call for the renovation of a municipal facility.

All work must be complete by October 20, 2026. Recoat Washington Place Beretania Street driveway. Phase 1: Site Preparation & Cleaning Sweeping & Debris Removal: Thoroughly clean the pavement surface to remove all loose dirt, gravel, vegetation, oil, and debris. Phase 2: Crack Filling & Sealing Crack Cleaning: Clean all cracks wider than 1/8 inch to remove any vegetation and moisture. Hot-Applied Sealant Placement: Inject a hot-applied, rubberized crack sealant directly into cleaned cracks. Phase 3: Leveling Low Spots (Depressions) Tack Coat Application: Spray tack coat liberally over depressed low spots holding water. Leveling/Skin Patching: Apply a fine-aggregate hot mix asphalt, high-performance cold/warm polymer-modified asphalt skin patch, or equivalent patching material to bring low areas flush with surrounding grades. Phase 4: Surface Sealcoating / Top Coating Materials: In the specified existing paved area, completely apply an asphalt-emulsion-based sealcoat (or refined coal-tar/polymer alternative) mixed with 3 to 5 lbs of silica sand per gallon and approved latex fortifying polymers for improved skid resistance and durability. An equivalent product which seals and coats the existing surface is acceptable as long as meets this intended purpose. CSD-27-007-0 If you have any questions please contact the Contract Administrator's representative, Dixon Park at (808) 345-0245 or by email at dixon.j.park@hawaii.gov