Site work and renovation of a mixed-use development in Skokie, Illinois. Completed plans call for the renovation of a playground / park / athletic field; and playground / park / athletic field.

Installation of netting at Skokie Sports Park and the removal and installation of new playground equipment at Emerson Park. Bonds: 10% Bid Bond, Certified Check required. Question Deadline 08/24/2026 If the Bidder is in doubt as to the interpretation of any part of the Bid Documents, or finds errors, discrepancies or omissions from any part of the Contract Documents, they must submit a written request for interpretation thereof not later than three (3) days prior to opening of bids to the Park District Contract Awarded: September 16, 2026 Board Approval: September 15, 2026 General Pricing shall include ground protection, lifts and any necessary excavation equipment. Pricing shall include removal and disposal of any spoils and/or waste generated. All warranty information shall be included with bid submission regarding the netting and pole systems. Base Bid (green) o Four (4) 3-Section heavy duty steel poles spaced NTE 50' OC in front of existing 50' AGL system. o Pole locations TBD 20' Deep borings - 4,000 psi concrete Three (3) Horizontal rows 1 x 7 galvanized steel strand cable with vertical face cables Heavy duty end connectors, galvanized eyebolts and curved washer attachments o # 18 x 1" nylon netting (spec sheet below) or an equal to or greater than product, 1" Square 5% resin weather treated, rope bordered (minimum 1/4"), on the square golf netting secured to the cables utilizing spring loaded snaps, heavy duty twine and steel supports o (3) 55' High sections of netting finishing 45' AGL Alternate #1 (pink) o One (1) 24" OD/16" OD, 2-section heavy duty steel pole spaced NTE 50' OC in front of existing 20' AGL system. o Pole locations TBD 36" OD x 16' deep boring - 4,000 psi concrete o Two (2) Horizontal rows 1 x 7 galvanized steel strand cable with vertical face cables Heavy duty end connectors, galvanized eyebolts and curved washer attachments #18 x 1" nylon netting (spec sheet below) or an equal to or greater than product, 1" Square 5% resin weather treated, rope bordered (minimum 1/4"), on the square golf netting secured to the cables utilizing spring loaded snaps, heavy duty twine and steel supports Alternate #2 (blue) One (1) 24" OD/16" OD, 2-section heavy duty steel pole spaced NTE 50' OC in front of existing 20' AGL system. Pole locations TBD o 36" OD x 16' deep boring - 4,000 psi concrete o Two (2) Horizontal rows 1 x 7 galvanized steel strand cable with vertical face cables o Heavy duty end connectors, galvanized eyebolts and curved washer attachments # 18 x 1" nylon netting (spec sheet below) or an equal to or greater than product, 1" Square 5% resin weather treated, rope bordered (minimum 1/4"), on the square golf netting secured to the cables utilizing spring loaded snaps, heavy duty twine and steel supports