Renovation of a military facility in Lorain, Ohio. Completed plans call for the renovation of a military facility.

USCG Station Lorain Security System With CCTV Location- 110 Alabama Ave. Lorain, OH 44052 The estimated range of this procurement is between $25K and $100K. *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. The scope of work includes the design, supply, installation, testing, and commissioning of a CCTV system with 12 cameras and an Intrusion Detection System (IDS) covering all external doors and windows, as well as an access control system for the main entry gate at the Lorain facility. Specifically for the main entry gate, the contractor shall install new dual-authentication entry pads Common Access Card (CAC) reader combined with a PIN pad on both the exterior and interior sides of the gate. The contractor must provide all necessary equipment, labor, and materials except as specified as Government Furnished. Installation Requirements Conduct site survey to determine optimal camera placement for coverage and performance. Install cameras, Network Video Recorder (NVR), cabling, mounts, power supplies, and any required network switches or Power over ethernet (Poe) injectors. Label all cables, components, and ports for easy maintenance. Ensure all cameras are properly aimed, focused, and configured to capture required fields of view (license plates and occupant faces). Perform system configuration , testing, and optimization for reliable operation. Twelve (12) CCTV cameras with minimum full HD 1080 p or higher resolution. License plate recognition (LPR) of moving vehicles (minimum 20 MPH). Facial identification of drivers in vehicle cabins. Night Vision and wide dynamic range capabilities for low-light and high contrast environments. Weatherproof (ip66 or higher) and vandal resistant (ik10 or higher) enclosures. All cameras and equipment provided for this project must be manufactured either in the United States of America (USA) or in designated countries in accordance with the World Trade Organization Government Procurement Agreement (WTO GPA) Trade Agreements Act (TAA) and the United States-Korea Free Trade Agreement (KORUS FTA). Additionally, the manufacturer must provide a letter certifying compliance with the National Defense Authorization Act (NDAA) requirements. Network Video Recorder (NVR) or equivalent system with capacity to store at minimum 30 days of continuous video footage from all cameras at full resolution. Redundant power supply and surge protection for all components. All required network cabling (Cat6 or higher), connectors, conduit, mounts, junction boxes, and supports. All Cameras shall have rotation and magnification functions. Remote viewing capability