Site work and renovation of a water / sewer project in Cantua Creek, California. Completed plans call for the renovation of a water / sewer project.

Replacement of six valves ranging from 30-inch to 60-inch, including three sluice gates inside sealed vaults and three butterfly valves inside an open vault, plus one add-alternative butterfly valve replacement. Bonds: Bid Bond required (unspecified amount), Performance Bond required (unspecified amount), Payment Bond required (unspecified amount). Sealed bids for removing and replacing six by-pass , division, and subline valves ("Project"), including all other work in accordance with the District's Specification No. 26-04 This project generally consists of the following: Removal and replacement of 10 butterfly and slide gate valves varying in sizes from twelve-inches to forty-eightinches. The Work covered under this Contract will be performed along public right of ways and within easements on private property located within the Westlands area of service. The project location is indicated on the Drawings. The Work to be performed by the Contractor generally includes: Furnishing all labor, superintendence, materials, power, water, tools, equipment and services required by the Contract Documents or required to complete the Work. Coordinate work of all trades. Furnishing and installing miscellaneous items incidental to or necessary for completion of the Work, whether these items are specifically indicated in the Contract Documents or not. Westlands-Furnished Equipment: 1. Westlands will furnish the following products to Contractor for installation: a. Three slide gate valves 1) 30" x 30" slide gate model S-6000-F Sluice Gate manufactured by Waterman per drawing RB-26-0012 (Figure 17). Location PV2 Slide gate weighs 1,259lbs 36" x 36" slide gate model S-6000-F Sluice Gate manufactured by Waterman per drawing RB-26-0013 (Figure 16). Location 37-0.3 Slide gate weighs 1,521lbs 60" x 60" slide gate model S-6000-F Sluice Gate manufactured by Waterman per drawing RB-26-0014 (Figure 15). Location 27-5.0E Slide gate weighs 4,891lbs Three butterfly valves 30" butterfly valve manufactured by Pratt per drawing GA11304 (Figure 18). Locations 5-6.0, 8-5.0, 30-1.3-5.0, and 33-6.0 Butterfly valve weighs 1,750lbs