Renovation of a municipal facility in East Fayetteville, North Carolina. Completed plans call for the renovation of a municipal facility.

As per Adda 1 site visit location updated and time and change from 10:00 AM to 10:30 AM. Replacement of fencing for the employee garden. The Contractor shall furnish all labor, materials, equipment, permits, and supervision necessary to complete the fence replacement at the County employee garden. Removal and disposal of existing fence Alloy Type: Aluminum alloy 6063-T6 for optimal structural strength and corrosion resistance. Please provide pricing option for 6063-T5 as well. Must meet AAMA 2604 but prefer AAMA 2605 architectural grade powder-coating specifications. Please provide pricing option for both. Fence Top Options - Spear Top / Pressed Point Pickets extend past the top horizontal rail and finish in a pointed or spear-shaped spearhead point, mimicking classic wrought iron for traditional or high-security aesthetic appeal -or- Extended / Alternate Spear Top: Features alternating picket heights or prominent spear points to increase deterrence while maintaining an ornamental look. Line/End Post Dimensions: 2-1/2" x 2-1/2 " and inner wall thickness 0.090" minimum Gate Post Dimensions: 3" x 3" and inner wall thickness 0.125" minimum Embedment Depth: Municipal specs mandate that posts be set 32 to 36 inches deep into concrete footings , terminating roughly 6 inches below grade. Horizontal Rails: Minimum dimensions of 1-1/8" x 1-3/4" or 1-1/4x 1-3/8" with reinforced walls Vertical Pickets: 3/4 square minimum with wall thickness 0.055 to 0.080 inches Picket Spacing: Standard spacing is under 4 inches to meet municipal safety codes Color is black o Height 6' One 8-10 foot wide gate installed at front of garden entrance (To account for trucks and tractors entering the garden for maintenance) o One 3 ' walkthrough gate All work must be completed within (30) calendar days of commencement of NTP. All equipment must be submitted for approval to Cumberland County prior to purchase. Project must be complete and turned over to Cumberland County prior to November 30th, 2026 Additional clarifications Permits and Licenses : The contractor shall procure and pay all charges and fees for all permits and licenses incidental to the due and lawful prosecution of the work. Construction Trash & Debris Removal: During construction of the project, the contractor shall be responsible for the removal of any trash or debris created by his/her work to an approved disposal site . The site will be always maintained in a clean condition. Trash and debris from daily operations are to be stored in appropriate storage containers or trucks until removal to the disposal facility