Site work and renovation of a power facility in Greenport, New York. Completed plans call for the renovation of a power facility; and for site work for a power facility.

Replacement of above-ground storage tanks at the village power plant. The work consists principally of removing and replacing an existing 8,000-gallon double-wall steel diesel AST (Tank # 19) and an existing 1,000-gallon double-wall steel waste-oil AST (Tank # 20) and installing a new 1,000 -gallon double-wall steel UL- 142 waste oil AST (Tank #41) manufactured by Containment Solutions and a new 8,000-gallon double-wall steel UL- 142 Diesel AST (Tank #42) manufactured by Containment Solutions (C- 110.01/ C-120.01) and install a new drum containment pallet and level float for the existing 55- gallon drum, and the existing OMNTEC OEL8000II to be replaced with new OMNTEC Proteus-X ATG together with existing reinforced concrete pad verification, defined repairs and tank anchorage as detailed , product piping, secondary containment piping, vents, valves, spill containment, tank instrumentation, automatic tank gauging, leak detection, high-level annunciation, pump control , electrical connection, and final testing/certification. New 1,000-gallon double-wall steel UL-142 Waste Oil AST (Tank #41) replacing existing AST (Tank #20) identified on C- 100.01/C-110.01. New 8,000-gallon double-wall steel UL- 142 Diesel AST (Tank #42), replacing existing AST (Tank #19) identified on C- 100.01/C-120.01. New Omntec Proteus-X ATG serving Tanks # 36 , # 37, # 41 , #42, and #43, including required programming, relay/interface hardware and migration and testing of retained Tank # 36/# 37 monitoring equipment. New 3/4-inch Schedule 40 carbon-steel waste-oil primary product piping with 4-inch SWFRP secondary containment piping for the outdoor transition. New 2-inch Schedule 40 carbon-steel diesel supply and return piping with 4-inch SWFRP secondary containment piping for the outdoor transition. Connection of new diesel supply/return piping to the existing permitted indoor emergency-generator product piping; existing indoor piping, day tanks and previously permitted generator equipment are to remain unless specifically shown otherwise. New tank-top equipment, valves, vents, gauges, spill containers, leak sensors, ATG equipment and related accessories. New waste-oil transfer-pump contactor/starter arrangement with the Omntec Proteus X ATG programmed automatic start/stop and Tank #41 high-level shutdown per D-200.01. New drum spill-containment pallet for a single 55-gallon drum (Tank #43) ; existing 660- gallon drum-storage area identified as Tank #38 remains