Site work, new construction and renovation of a mixed-use development in Uniontown, Alabama. Completed plans call for the construction of a detention facility; for site work for a detention facility; and pre-engineered storage facility.

As of February 13, 2025, this project has been cancelled. It will readvertise and will rebid at a later date. Plans and specifications are for viewing purposes only and in order to be considered an official bidder contractors must obtain plans and specifications from Goodwyn Mills & Cawood Inc. PLEASE NOTE: The estimated value listed for this project is for searchability purposes only and does not reflect the actual construction budget as determined by the owner. It should not be used for estimation purposes at this time. Prequalification Proposals from General Contractors shall be submitted to Goodwyn Mills Cawood, LLC on behalf of the Owner electronically to the attention of Missy Lee at missy.lee@gmcnetwork. com: UNTIL 4:00 PM LOCAL TIME; ON THURSDAY, JANUARY 31, 2025 The Work of the project includes, but is not limited to, new pre-engineered metal building construction for labs and classrooms, associated sitework, new mechanical, electrical, plumbing systems and associated equipment, coordination and supervision of the entire project, and all related work, as indicated in the Bid and Contract Documents. Drawings and Specifications may be examined at the Office of the Architect; and Online Other sets for general contractors, and sets for subs and dealers, may be obtained with the same deposit, which will be refunded as above, less cost of printing, reproduction, handling and distribution, which is estimated to be the same as the deposit amount. Partial sets will not be available. A cashiers check or bid bond payable to Ingram State Technical College in an amount not less than five (5) percent of the amount of the bid, but in no event more than $10,000, must accompany the bidder's proposal. Performance and statutory Labor and Material Payment Bonds, insurance in compliance with requirements, and verification of EVerify enrollment (also with Proposals), will be required at the signing of the Contract. Bids must be submitted on proposal forms furnished by the Architect or copies thereof. All bidders bidding in amounts exceeding that established by the State Licensing Board for General Contractors must be licensed under the Provision of Title 34, Chapter 8, Code of Alabama, 1975, as amended, and must show such evidence of license before bidding or bid will not be received or considered by Architect or Owner; The bidder shall show such evidence by clearly displaying their current license number on the outside of the sealed envelope in which the proposal is delivered; Bidder must also include their current license number on the Proposal Form. No bid may be withdrawn after the scheduled closing time for receipt of bids for a period of SIXTY (60) days. Additional qualifications and requirements for General Contractor Bidders and separate Subcontractors and Manufacturers are indicated in the Bid and Contract Documents. The Owner reserves the right to reject any or all proposals and to waive technical errors if, in their judgment, the best interests of the Owner will thereby be promoted.