Site work and paving for a road / highway in Livermore, California. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The Project is located at located at various locations in the City of Livermore, CA. See sheet K-1 of the project plans for list of streets to be improved, and it is described as follows: the construction of slurry seal and micro-surfacing pavement treatments in the City of Livermore. The project consists of preparatory street cleaning, tree trimming, root pruning, asphalt concrete pavement repairs, installation of ADA ramp truncated domes, minor concrete work, crack sealing, removal of existing traffic striping and markers, application of micro-surfacing and slurry seal treatments, adjustment to grade of utility boxes, the installation of new thermoplastic pavement striping and markings and raised pavement makers and various site improvements in the City of Livermore. 1.2.2. Time for Completion. The planned timeframe for Substantial Completion of construction of the Project is 50 Working Days after the commencement date stated in the Notice to Proceed. Final Completion of the Project is planned to be 10 Working Days after Substantial Completion. 1.3 Construction Cost. The Engineer's estimated construction cost is: $1,000,000. City reserves the right to reject any and all bids and to waive any non-substantive irregularities.License and Registration Requirements. 1.4.1. License. At the time of bid opening and for the duration of the Project, Contractor shall possess a valid California contractor's license for the following classification(s) and be registered with the California Department of Industrial Relations ("DIR"): Class "A" or Class "C-32" (See also, Instructions for Bidders, Section 4, Licenses and DIR Registration). A bid submitted by a bidder that does not possess any of these licenses at bid opening may render the bid non-responsive unless exempted by federal or state law, barring award of the Contract to that bidder. 1.4.2. DIR Registration. City will not accept a Bid Proposal from or enter into the Contract with a bidder without proof that the bidder and its Subcontractors are registered with the California Department of Industrial Relations ("DIR") to perform public work under Labor Code Section 1725.5, subject to limited legal exceptions Questions regarding the Project, the bid procedures, or the meaning or intent of the Contract Documents must be submitted in writing to the Engineer at: Attention: Saurabh Ni jhawan Associate Civil Engineer Community Development, Engineering City of Livermore 1052 South Livermore Avenue Livermore, CA, 94550 Email: snijhawan@cityoflivermore.net ach Bid Proposal must be accompanied by bid security of ten percent of the maximum bid amount, in the form of a cashier's or certified check made payable to City, or a bid bond executed by a surety licensed to do business in the State of California on the Bid Bond form included in the Contract Documents. The bid security must guarantee that within ten days after City issues the Apparent Low Bidder Notice ("ALB Notice"), the bidder must execute the Contract and submit payment and performance bonds, warranty bonds, insurance certificates and endorsements, as required by the Contract Documents.Performance, Payment, and Warranty Bonds. The successful bidder will be required to provide performance and payment bonds each in the amount of 100% of the Contract Price and a Warranty Bond in the amount of 15% of the Contract Price.