Site work and renovation of a water / sewer project in Murrieta, California. Completed plans call for the renovation of a water / sewer project.

This project includes constructing a 2.0 MG welded steel potable water storage tank located at 29527 Via Las Palmas 1 mile north of Ramon Road in an unincorporated area of Riverside County known as Thousand Palms. Reservoir Site Work: The reservoir site work shall consist of all utility location and verification (excavating, exposing, and verifying top, bottom, and side of utility facility); earthwork and site work including excavating, importing, exporting, trenching, scarifying, backfilling, placing, filling, compacting, and grading all soil and rock materials onsite; restoring all areas not intended to be altered to pre- construction conditions (inside and outside project limits); transporting offsite all vegetation and deleterious material; furnishing and installing site piping and all related work; leakage and pressure testing pipelines; protecting in place or removing and replacing all existing utilities and public and private improvements; constructing storm drains, V-ditches, drainage swales, concrete inlets and outlets, rock rip-rap, and all drainage facilities; furnishing and installing crushed miscellaneous base; furnishing and installing site fencing, gates, and appurtenances; furnishing and installing all electrical service equipment, electrical panels, instrumentation and controls, lighting, conduit, and conductors; and all related work. Steel Reservoir Work: The reservoir work shall consist of furnishing and erecting one (1) new 2.0 MG welded steel potable water storage reservoir with appurtenances; furnishing all design calculations and fabrication drawings; furnishing and installing protective coatings on all interior and exterior surfaces of the reservoir, including piping, appurtenances, and miscellaneous metal; shop and field testing; constructing reinforced concrete ringwall and related asphalt sand and clean sand foundation beneath reservoir; furnishing and installing reservoir inlet and outlet piping; furnishing and installing reservoir drain and overflow piping; leakage and pressure testing pipelines; and all related work. Estimated Value: $2000000-$2500000 Bid: 10% Payment: 100% Performance: 100% Liquidated Damages: $500.00 per calendar day License Requirements: Class A Start/Delivery Date: November 2020 Project Duration: 300 Calendar Days. Online Q&A: Yes Q&A Deadline: August 26, 2020 5:00PM