Site work and paving for a road / highway in Eau Claire, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Project was awarded to Fahrner Asphalt Sealers, LLC in the amount of $54,316.80 5% bid security is required. For questions regarding this project contact the Purchasing office, 203 S. Farwell Street, P.O. Box 5148, Eau Claire, WI 54702-5148, telephone (715) 839-4957. Work under this contract will consist of applying GSB-Friction Seal, an emulsified Gilsonite-asphalt surface treatment which includes the simultaneous application of a suitable fine-aggregate to maintain adequate surface friction on .86 miles of City streets covering a surface area of approximately 15,088 square yards (Sq.Yd.). This contract will also include removal of existing paint markings prior to sealing. All friction sealing on the listed streets will include intersection radius fillets, as marked by the City. It is the desire of the City that the work completed by July 2, 2021. The scheduling of sealcoat operations around schools and business areas shall be coordinated with the City. All work shall be completed no later than July 16, 2021 This work shall consist of furnishing all labor, material, and equipment necessary to perform all operations for the application of an GSB-Friction Seal to asphaltic concrete surface courses. The installation shall be by spray application of the GSB-Friction Seal emulsion, and the simultaneous application of fine aggregate. All work shall be in accordance with the specifications, the applicable drawings, and subject to the terms and conditions of this contract. This item shall consist of the application of an emulsified asphalt surface treatment composed of an emulsion of natural and refined asphalt materials, a polymer additive, and the simultaneous application of a suitable fine-aggregate to maintain adequate surface friction. The emulsified asphalt surface treatment shall be applied in accordance with these specifications, and as shown on the plans or as directed by the Engineer.