Site work for a road / highway in Brady, Montana. Completed plans call for site work for a road / highway.

Chip Seal and Scrub Seal East of Brady East Great Falls Area The Montana Department of Transportation (MDT) is accepting bids for Chip Seal/Fog Seal East of Brady East Great Falls Area. Contractor shall provide all labor, equipment, materials, incidentals and traffic control necessary to produce, haul, place, roll and broom approximately 43,648 square yards of laid-in-place scrub seal. The scrub seal will be approximately 3.1 miles long and 24 feet wide. Contractor shall provide PMRE (Polymer Modified rejuvenating Emulsion) and Type 1 chips. Traffic control with pilot cars must be maintained until dusk or fading light each workday as determined by the Project Manager. Contractor must provide enough pilot cars to keep traffic stops to a maximum of 15 minutes. Prior to emulsion application, Contractor must ensure roadway is clean and free of debris. All cracks must be dry and blown free of debris to allow emulsion to adhere to the existing crack walls. The emulsion application rate for scrub seals is estimated at .45 gallons per square yard. Following application of the emulsion, use a scrub broom to force the emulsion into the existing surface. The covermaterial application rate is estimated at 25 pounds per square yard. Actual application rates will be based on the scrub design and the actual field adjustments. Work is required to be completed on or before: august 31, 2022 *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.