Renovation of a multi-residential development in Houston, Texas. Completed plans call for the renovation of a multi-residential development.

The purpose of this project is to provide carbon monoxide sensors to the Houston Housing Authority properties that have gas appliances. The properties have many different layouts, and have 1, 2 and 3 levels. The code required carbon monoxide detectors shall be installed for each different unit layout. Sketches are provided for some typical unit layouts. Carbon monoxide detectors with (120V, with battery backup) and wireless interconnect are to be utilized. Kidde, First Alert, and USI Electric or equivalent UL listed for the application are acceptable. The new sensor shall be connected to a hot leg (un-switched) circuit with #12 THWN conductors routed in surface raceway to the nearest light fixture, switch, receptacle, or smoke detector (verify exact location of light fixture, switch, receptacle, or smoke detector in field). All sensors to be wirelessly interconnected for multi-level apartments and/or multiple sensors per floor. Existing conduit shall be utilized where possible. New conduit shall be surface mounted Wiremold V500 series (or equal). Provide junction box extenders as required. Deadline to submit question 01/04/22 4:00 pm Unit prices for carbon monoxide detectors and Wiremold shall be provided. *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com.