Site work and new construction of a mixed-use development in Kingston, Ontario. Completed plans call for the construction of a 33,480-square-foot, one-story above grade warehouse / distribution facility.

Public Works and Government Services Canada (PWGSC), Real Property Branch requires a qualified general contractor to carry out construction of a Dairy Barn complete with dairy operations equipment and supporting infrastructure and utilities at the Correctional Service of Canada (CSC), Joyceville Institution, located on Ontario Highway 15, near Joyceville, Ontario. This Work shall be in accordance with the three part specifications for Project No. R.100644.001 Joyceville Institution Construct Cow Barn and Manure Tank and the associated Drawing sets 1 and 2. The work includes but is not limited to: a large purpose built dairy cattle barn including office spaces, a manure holding tank, livestock holding areas, parlours, nurseries, refrigerated milk storage, and other ancillary spaces. The dairy cattle barn will be approximately 3,100 m2 and is designed to accommodate a milking herd of approximately seventy (70) cows. Also included are: an extension to fire water line and hydrant system, a stand alone sanitary sewer line and septic field system, potable water wells, distribution lines and treatment equipment, a natural gas fueled backup power generation system and controls, access roads, earthworks and surface drainage structures, area/street lighting, concrete walkways, and landscaping. Work conditions are restrictive in that work will be delivered adjacent to a medium security federal penitentiary and this site is potentially subject to worker security screening, limited access times, and unforeseen interruptions. The Work, and contractor's associated activities will be preceded in all instances with the contractor installing and maintaining temporary security measures, safety barriers, alternative access, and Environmental Impact Mitigation Measures per legislated standards, and in accordance the sets of Specifications and their respective sets of Drawings. The Contractor must perform and complete the work eighty (80) weeks from the date of notification of acceptance of the offer. Documents can be obtained from https://buyandsell.gc.ca/procurement-data/tenders