Site work and new construction of a service station / car wash facility in Montrose, Pennsylvania. Completed plans call civil work for a service station / car wash facility.

PROJECT NO. FM-7216.1 Remove existing pavement, remove or relocate other site amenities, and prepare site for new vehicle wash building . The project is located at 18786 State Route 706, Montrose at Bridgewater Township, Susquehanna County, Pennsylvania (PennDOT District 4-5). 1. Remove existing pavement, remove or relocate other site amenities, and prepare site for new vehicle wash building as indicated on Contract Drawings. 2. Cut, remove and patch asphalt paving at all areas of underground site utility work (propane gas, water, sanitary sewer, storm sewer, and electrical). Coordinate with Electrical Construction Contract (.4) and Propane Supplier. 3. Provide erosion and sedimentation controls. 4. Provide stripping, stockpiling, and restoration of topsoil, with seeding and mulch, for natural turf areas disturbed by underground utility trenching and other work activities. 5. Site Liquefied-Petroleum (L-P)/Propane Service: a. Coordinate schedule, layout, and installation with L-P Supplier (AmeriGas). b. Exclude L-P Supplier's costs and fees from bid. Administer PennDOT's payment of L-P Supplier's costs and fees as indicated in Paragraph "Responsibility for Utility Fees," later in this specification Section 01 01 00. c. Furnish and install concrete pad for new above-ground L-P tank. d. Provide trenching work (excavation, bedding, backfill, compaction, and related soil testing) for installation of L-P supply line from connection at tanks to propane regulator set at new wash building. e. Coordinate building regulator set location and point of connection to new wash building propane gas piping system with Plumbing Contractor (.3). f. L-P supplier will provide the following for the site L-P/propane service: 1) Furnish and install new L-P tank, regulator at tank, vaporizer, valves, manifold piping between tanks, supply pipeline to wash building, regulator at building, and other related outside equipment, devices, and accessories. 2) Final connection to building propane system. 3) Fill the new tank and purge air from the system. 4) Testing of system, including propane appliances inside pump room. 6. Site Water Service: a. Furnish and install well pump in existing well bore hole. Provide well pump control panel with variable-frequency drive unit and related controls for well pump system. b. Furnish and install water service line, and provide related trenching work, from well to point of connection with building water line within 5-feet of the new wash building. c. Coordinate work with Plumbing Construction Contract (.3), Electrical Construction Contract (.4), and Authorities Having Jurisdiction. Remove and modify existing chain-link fencing, and construct new chain-link fencing and gate, Construct new Vehicle Wash Building in accordance with Contract Drawings and Project Manual. Coordinate work with the other Construction Contracts (.2, .3 and .4). New building to include but not be limited to: a. One (1) Vehicle Wash Bay with heated, reinforced concrete floor slabs and approach slabs. b. One (1) Pump Room