Renovation of an educational facility in Philadelphia, Pennsylvania. Completed plans call for the renovation of a educational facility.

Location- 601 Fairmount Ave Philadelphia, PA 19123 The Project consists of the alteration of Rooms 100, 101, 105, 107, 200, 201, 202, 203, 205 and associated adjacent spaces. 1 . Unless otherwise indicated remove all existing lighting fixtures in classroom modification areas along with existing branch circuits. Remove existing lighting control wiring. Provide new LED lighting fixtures, occupancy sensors, power packs, dimmer switches and lighting control wiring. Provide all new wiring and conduit from existing panelboards. Existing conduit can be utilized, where possible. 2. Remove existing light switches and switch cover plates and provide new lighting controls in all rooms as indicated on drawings. 3. Unless otherwise indicated all existing surface mounted receptacle outlets, wired utilizing wiremold type raceways, shall be removed along with the wiring and raceways. Provide new receptacles as indicated on drawings. Provide new branch circuits including new conduits to all new receptacles. 4. Unless otherwise indicated, existing recessed ceiling tile-mounted functional speakers shall be reused. Existing speakers shall be temporary disconnected, removed and saved for reinstallation. Once ceiling is replaced by General Contractor, the electrical contractor shall reinstall existing saved speakers back on new ceiling tile and shall reconnect to existing speaker wiring. Remove all existing non-functional abandoned speakers and provide blank cover plates on outlet boxes. 5. All existing wall-mounted telephones be removed and reinstalled when new work is complete. Remove old abandoned telephone outlets and provide blank cover plates on recess outlet boxes. 6. Remove existing surface-mounted speaker boxes and associated junction boxes. 7. All existing synchronous clocks shall remain. Where indicated, provide new wireless battery powered clock and tie into existing master-clock system. 8. Unless otherwise indicated, remove existing data ports, associated cabling, raceways, etc. Existing wireless access points shall remain. Provide additional IT equipment, data ports, data cabling, etc. as indicated on plans. 9. Provide new panelboards and feeders as indicated on drawings. 10. Coordinate all electrical construction with general construction phasing plan. Provide temporary lighting and power during construction period for all trades. Each Proposal shall be accompanied by either a certified check or a surety company's bid bond, in an amount of not less than 10% of the Proposal amount, which check or bond shall be payable to The School District of Philadelphia as payee or obligee. (BID PROCESSING FEE WAIVED FOR THIS PROJECT) All inquiries (RFIs) regarding the Drawings and Specifications must be submitted in writing to capitalbids@philasd.org no later than Ten (10) Calendar Days prior to the scheduled Bid Opening. Contrary requirements for the submission and opening of bids in these Instructions to Bidders have been suspended for this project. For a bid to be accepted, Bidders must be prequalified prior to bidding by the School District of Philadelphia in accordance. The School District will not accept bids from a Bidder that has not been prequalified prior to bidding through the prequalification RFQ process. Bidders may obtain complete sets of the Bidding Documents from the issuing office designated in the Advertisement or Invitation to Bid in the number and for the non- refundable deposit sum stated therein. A Performance Bond, a Labor and Materialmen's Bond, and a Maintenance Bond shall be required as indicated in the General Conditions of the Contract for Construction. MBE Range: 15%-20% WBE Range: 10%-15% Final Completion -OCTOBER 28, 2022