Site work and paving for a road / highway in Kalamazoo, Michigan. Completed plans call for site work for a road / highway; and for paving for a road / highway.

As of June 30, 2022, the project has been awarded. A timeline or status of construction have not been confirmed. Questions about this IFB should be directed to: Department Contact: Anthony Ladd Assistant Director at (269) 337-8717 Include on the Envelope the Project Name and Bid Reference Number. All Envelopes Must Be Sealed. You are invited to submit a bid for this project. Specifications, terms, conditions and instructions for submitting bids are contained herein. This Invitation for Bid with all pages, documents and attachments contained herein, or subsequently added to and made a part hereof, submitted as a fully and properly executed bid shall constitute the contract between the City and the successful bidder when approved and accepted on behalf of the City by an authorized official or agent of the City. Please review the bid document as soon as possible and note the DEADLINE FOR QUESTIONS in the Instructions to Bidders. Cold mill to depth in inches as indicated on the bid section of this document or as directed by the Engineer. Approximately 133,347 square yards of full width cold milling and curb reveal plus end joint milling. Bid price to include all transportation costs to the locations shown on the Bid and Award pages. Cold milling work shall be performed under traffic. No road closures will be allowed. The City will provide the necessary temporary traffic control and flagging for the cold milling operation. Hand chipping and removal of material which is left due to the inability of the cold milling machine to work immediately adjacent to the face of curb, face of manholes, water valves and water boxes will be performed by the City. Cleaning and sweeping of the cold milled pavement will be done by the City. The bidder/contractor shall verify all measurements and shall be responsible for the correctness of same. Any difference which may be found shall be submitted to Anthony Ladd, PE, Public Works Division Assistant Director at (269) 337-8717 for consideration prior to beginning work with sufficient time to reach agreement on quantity of work to be completed. The Contractor shall schedule all work to accommodate the City's schedule. In the event Contractor's schedule falls on weekends, nights or overtime work is required, no additional compensation will be allowed. All work performed under this contract shall be in accordance with the 2020 Michigan Department of Transportation "Standard Specifications for Highway Construction". The Contractor shall guarantee all of his/her work for a period of one (1) year following the date of final acceptance of the completed work and shall repair, replace or make good any materials or work which shall fail to function or perform or be found defective, without costs to the City. Payment will be based on the total project amount bid, for actual milling provided. The City reserves the right to add or delete locations. Additions or deletions less than 25% (by area) of the locations specified will not change the unit price. Cold milling material removed must be disposed of by the Contractor *The list of planholders and/or interested bidders is not being tracked by the stakeholders involved with this project. If you are an interested contractor and wish to be listed as a bidder, please notify our editorial staff at addtobidlist@constructconnect.com. *Information regarding subcontractor bidding has not been disclosed to the content management team at this time. Interested subcontractors should contact the general contractor directly for more information.