Renovation of an educational facility in Pewaukee, Wisconsin. Completed plans call for the renovation of a educational facility.

Base Bid: Electrical Contractor provide: It is the intent of these specifications to provide complete and workable electrical systems as shown on the accompanying plans and as specified herein except such parts as are specifically exempted herein. Provide all necessary supervision, coordination, labor, materials, equipment, fixtures, dryage, hoisting, tools, transportation, plant services and facilities, machinery and connections to utilities for the installation of complete and operable electrical systems. If details or special conditions are required in addition to those shown on drawings, provide all material and equipment usually furnished with such systems or required to complete their installation, whether noted in plans and specification or not. Bidder agrees that, if awarded contract, the bid will be valid until April 15, 2022. The Owner will provide a Purchase Order no later than April 15, 2022. Project shall be substantially complete by July 1, 2022 Base Bid: Electrical Contractor provide: It is the intent of these specifications to provide complete and workable electrical systems as shown on the accompanying plans and as specified herein except such parts as are specifically exempted herein. Provide all necessary supervision, coordination, labor, materials, equipment, fixtures, dryage, hoisting, tools, transportation, plant services and facilities, machinery and connections to utilities for the installation of complete and operable electrical systems. If details or special conditions are required in addition to those shown on drawings, provide all material and equipment usually furnished with such systems or required to complete their installation, whether noted in plans and specification or not. Materials and labor shall be new (unless noted otherwise), first class and workmanlike and shall be subject at all times to the A/E's inspections, tests and approval from the commencement until the acceptance of the completed work. The layout shown on the drawings is necessarily diagrammatic but shall be followed as closely as other work will permit. The drawings provide design intent. The Contractor shall verify all dimensions at the site and be responsible for their accuracy. All sizes as given are minimum except as noted. Because of the scale of the Drawings, certain basic items, such as, pipe fittings, duct fittings, access panels, and sleeves, may not be shown. Where such items are required by Code or by other Sections, or where required for proper installation of the Work, such items shall be included, whether shown or not. In the event of any inconsistencies between the specifications, drawings, contract documents, applicable laws, statutes, ordinances, building codes, rules and regulations, the contractor shall provide the better quality or greater quantity of work and comply with or conform its work to the most stringent legal or contractual requirements. Changes from these drawings required to make this work conform to the building construction shall be made only with prior written approval of the Architect/Engineer. All proposed changes shall be shown on shop drawings. All measurements shall be verified by actual observation and all work shall fit in place meeting the approval of the Architect/Engineer. Equipment Specification may not deal individually with minute items required, such as, components, parts, controls, and devices which may be required to produce the equipment performance specified or as required to meet the equipment warranties. Where such items are required to make the system operational, they shall be included by the supplier of the equipment at no additional cost, whether or not specifically called for.