Site work and paving for a sidewalk / parking lot in Palm Bay, Florida. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

The objective of this work order is to resurface the existing parking lot and adjoining access points. Limits of work are defined by speed hump south S-96 structure and speed hump at the end of Fellsmere Grade. The parking lot is approximately 135-feet by 545-feet wide (see attached site map). All work shall comply with the latest edition of the FDOT Standard Specifications for Road and Bridge Construction. Please direct all questions to: Amy Lucey Phone: (321) 409-2156 FAX: (321) 722-5357 525 Community College Parkway Palm Bay Service Center Palm Bay FL, 32909 Email: alucey@sjrwmd.com Any person with a disability requiring special accommodations at the pre-solicitation conference and/or bid/proposal opening shall contact purchasing at the phone number above at least five (5) working days prior to the event. If you are hearing or speech impaired, please contact this office by using the Florida Relay Services which can be reached at 1 (800) 955-8771 (TDD). The Department reserves the right to reject any and all bids or accept minor irregularities in the best interest of the State of Florida. The Completion Date of this Agreement is May 31, 2022, unless extended by mutual written agreement of the parties. The Work shall be completed for use no later than said date. Conduct a preconstruction meeting with District operations staff 48-hours in advance of mobilizing to site. Mobilize to site and provide all labor, equipment and material to complete the project. Place warning signs for drivers informing construction ahead/slow traffic. Maintain flagmen as necessary to complete the work. Provide appropriate MOT around work area including, but not limited to, traffic barriers, cones, barrels, etc. The parking lot and boat ramp shall be remain in operation during construction. However, onehalf the parking lot and one boat ramp may be closed at anyone time Remove all grass/dirt from edge of parking lot and around curbing. Ensure that runoff from the parking lot will drain to grass area. Sweep the entire parking lot and access points prior to paving If necessary, provide asphalt concrete surface (SP-9.5) leveling course for uniform surface course and as directed by the Project Manager. Apply tack coat prior to resurfacing or applying leveling course. Place 1.5-inch (compacted thickness) asphalt concrete surface (SP-9.5). a. Plant and equipment shall comply with the requirements of section 320. b. General construction requirements shall comply with the requirements of Section 330. c. Asphalt mix shall comply with the requirements of Section 334. d. Tack coat shall be applied per the requirements of Section 300.