Renovation of an educational facility in Winchester, Massachusetts. Working plans call for the renovation of a educational facility.

Muraco Elementary School Roof Repairs and Associated Work. Sub Bid Category Masonry Estimated Cost $664,000 Contractor Qualification DCAMM Certificate Value reflects from GC bidding project In general, the Contractor shall supply all labor, materials, equipment, temporary protection, tools, and appliances necessary for the proper completion of the work, as required in the Specifications, in accordance with good construction practice, and as required by the materials manufacturer. The work includes, but is not limited to, the following items: 1. Supply all temporary shoring, lighting, barricades, signage, and protection necessary to protect the building areas, building systems, and building patrons and public. Maintain such protection for the complete duration of the project. 2. Supply all disposal facilities, transportation, and labor necessary to dispose of all demolished materials, dirt, and debris off-site in a legal dumping area. The Contractor shall obtain all permits necessary to transport and dispose of all materials, rubbish, and debris. 3. The Contractor shall provide all lifts, cranes, generators, and equipment necessary to perform the work. 4. Remove and replace the existing EPDM roof systems on Roof Areas A and L as indicated on the Contract Drawings. Refer to Sections 024100 - SELECTIVE DEMOLITION, 028200 - ASBESTOS ABATEMENT and 075300 - ELASTOMERIC MEMBRANE ROOFING for additional information. 5. Perform roof repairs on Roof Areas B, C, D, E, F, G, H, I, J, K, and M as indicated on the Contract Drawings and within these specifications. Perform additional repairs as Unit Price Work. Refer to Sections 028200 - ASBESTOS ABATEMENT and 075300 - ELASTOMERIC MEMBRANE ROOFING for additional information Remove and replace sheet metal flashings, edge metal, gutters, and downspouts at designated Roof Areas. Perform spot repairs to the existing sheet metal fascia edge at designated locations. Refer to Section 076200 - SHEET METAL FLASHING AND TRIM for additional information