Renovation of a municipal facility in Underwood, Washington. Completed plans call for the renovation of a municipal facility.

Award Details Contract Award Date: Jun 30, 2022 Contract Award Number: 140F0322P0031 Task/Delivery Order Number: Contractor Awarded Unique Entity ID: QBGBHFWSGGE6 Contractor Awarded Name: 358 INVESTMENTS, LLC Contractor Awarded Address: , CO 81132-9796 USA Base and All Options Value (Total Contract Value): $43358 The US Fish and Wildlife Service has a requirement for Entrance Gate with a keypad at Spring Creek NFH in underwood, WA. The bases of award will be lowest price fair and reasonable. The NAICS code is 238990 and the small business size standard is $16.5 Million. The magnitude of construction is Between $25,000 and $100,000 Contract Specialist: Tiffannie Pannell Phone: 404-679-7182 Email: Tiffannie_Pannell@fws.gov Legacy Doc #: FWS Delivery Location Code: 0008349212 FWS SPRING CRK NFH 61552 STATE ROAD 14 UNDERWOOD WA 98651-9000 US 00010 Rehab/Rebuild Main entrance Gate to Spring creek NFH Period of Performance: 05/01/2022 to 07/01/2022 Electronic Response. The quotation MUST be electronically submitted via e-mail to Tiffannie_Pannell@fws.gov L.1.3 Requests for Information. Questions regarding this solicitation must be submitted in writing to Tiffannie Pannell via e-mail to Tiffannie_Pannell@fws.gov by April 08, 2022/14:30pm EST. General: 1.1 Spring Creek NFH is located at 61552 State Road 14 in Underwood, WA 98651. Build new wall and install automatic gate for main entrance to the hatchery at Spring Creek NFH. 1.2 Purpose/End Application: Currently, the fence/wall and gate at Spring Creek NFH do not meet the security requieremnts for the facility. The wall needs to be raised and extended to fullfill these needs. 2. Place of Performance and Period of Performance 2.1 Spring Creek NFH is located at 61552 State Road 14 in Underwood, WA 98651. (Gate is for the Fish Hatchery, not for the State Park). 2.2 Period of performance will start when the Notice to Proceed (NTP) is given to the Contractor by the Contracting Officer; the period of performance end date will be 60 days after the NTP. Normal duty hours Monday thru Friday 7:30 a.m. - 4:00 p.m. In the event of emergencies, Contractor shall provide contact information. Special arrangements must be made in advance if work will occur during non-duty hours including weeknights, weekends, and government holidays. Final invoices shall be submitted in ipp.gov on or before 10/28/2022. 2.3 Non-duty hours include weeknights, weekends, and Government holidays (New Year's Day, Martin Luther King Jr.s's Birthday, Memorial Day, Juneteenth Freedom Day, Independence Day, Labor Day, Columbus Day, Veteran's Day, Thanksgiving Day, Christmas Day). 3. Scope 3.1 Tear down the current wall and properly dispose of waste. Customer will keep and save the existing swing gate. I. New fence/wall will extend from the edge of rip rap to the road 9 ft L x 6 ft H, and from road to the dirt area 25 ft L x 6 ft H. a) Option 1: Decorative rock pillar (rock color should be similar color to the surrounding natural rocks) at each end with a metal decorative bar fence (dark brown to match gate). Example on attachment 1 b) Option 2: Full length decorative rock wall at each side of automatic gate. Example on attachment 2 II. Automatic gate between fence/wall 26 ft L x 5 ft H; dark brown (powder coated) with appropriate sensors to include vehicle loop, timer set to close automatic at 4:00 pm, keypad mounted on the exterior wall, left side of the gate. a) Two-part swing gate, design shall be made to withstand high winds. Top of the gate should be no higher than the wall/fence, with no less than 5' and no more than 10' clearance from the bottom of the gate to ground. b) Vehicle loop to be placed on the center of the road to exit the hatchery. Loop sensor shall open the gate when a vehicle is detected leaving the hatchery and it should close automatically after the vehicle has cleared the gate. c) Gate operator shall be equipped to be able to be operated with a remote transmitter. III. Contractor to provide options on design of gate and fence/wall. Spring Creek NFH will select the most appropriate design. 3.2 Option 1. Use existing wall as a base to extend the wall out and up to the specified length and height. Install new face rock throughout the entire extended wall. I. Install new automatic gate using same requirements as above. 4. Deliverables and/or Delivery Schedule: (for extended list a bid schedule and/or use of line item detail on the PR is recommended) Completed wall/site preparations and gate install. Project can be completed between 5/1/2022 - 7/31/2022. The color of the wall should be uniform and it should last for years without bleeding. 5. Government-Furnished Equipment (GFE) / Government-Furnished Information (GFI). Vendor is responsible for all equipment and supplies, unless otherwise provided for in this Statement of Work. 5.1 Identify any limitations. Vendor will need to take precautions as the main entrance gate is the only access and provides security to Spring Creek NFH. 6. Evaluation and Acceptance. The work will be inspected by the Hatchery Manager or designated person. 7. Technical Coordinator: David Carie, Spring Creek NFH, Hatchery Manager; Email: David_Carie@fws.gov; Office Phone: (509) 493-2989 Kenneth Lujan, Spring Creek NFH, Assistant Hatchery Manager; Email:Kenneth_Lujan@fws.gov; Office Phone: (509) 493-2989 Jorge Alcala, Columbia River Gorge National Fish Hatchery Complex, Facility Operations Specialist; Email: Jorge_Alcala@fws.gov; Office Phone: (509) 493-2989 *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document.