Renovation of a mixed-use development in Armada, Michigan. Completed plans call for the renovation of a educational facility.

Bidders' Qualifications Bidders shall be able to demonstrate the following: Shall be a reputable, recognized organization with at least (5) years successful experience on work of this type and scope, of equal or better quality than this project. Work Schedule Work hours: 6:00 a.m.-4:30 p.m. M-F 2.1 Where required, remove and dispose of old carpeting, tile, and base in accordance with all applicable ordinances, law and regulation. If shoe molding is present, remove with care and reinstall after carpet installation. 2.2 Prepare floor to receive new product in accordance with the Manufacturer's instructions. Repair minor holes, cracks, depressions and rough areas using materials recommended by carpet and/or adhesive manufacturer. 2.3 Commencement of installation constitutes acceptance of surface condition(s) by the flooring Contractor. 2.4 Carpet shall be glued to a new or existing surface. Adhesives shall be water-resistant, non-staining as recommended by carpet manufacturer, which complies with flammability requirements for installed carpet. After laying, lightly roll entire carpet to eliminate air pockets and ensure a uniform bond. 2.5 Seaming cement shall be a hot melt adhesive or similar product recommended by carpet manufacturer for taping seams and butting cut edges at backing. The seam cementing shall produce a secure seam, which will prevent pile loss. Seams at door shall be centered under the door; do not place seams in traffic direction at a doorway. 2.6 Install new vinyl base in all areas where carpet abuts walls, columns, pilasters, casework or other permanent fixtures in the room / area. Base thickness shall be .080".