Renovation of an educational facility in Brooksville, Florida. Completed plans call for the renovation of a 5,021-square-foot educational facility.

The project consists of an existing cafeteria renovation with an approximate square footage of 5,021. The project includes a complete renovation of the existing cafeteria and adding a brand new exterior walk-in cooler with modern lighting by the service lines. Some of the major trades are civil construction, selective demolition, miscellaneous roofing, interior finishes, foodservice equipment, fire sprinklers, HVAC, plumbing, and electrical. Work shall include all materials, equipment and labor necessary for a complete and properly functioning mechanical installation in accordance with all applicable codes, and contract drawings and specifications. Work shall include all work specified in Division-22, Plumbing and Division-23, HVAC. a. All controllers which are generally manufactured or shipped as integral with Division23 equipment (such as starters packaged with chillers, etc.). b. All electric motors and other electrical power consuming equipment (such as electric air heating coils, electric boilers, electric hot water heaters, etc.) which are specified in Division 23. c. All control circuits (including conduit and boxes) from the Division-26 panels to point of use including the necessary circuit breakers. d. All other control circuits, including conduit and boxes. e. All control connections to equipment. f. All control connections to controllers, switches, motors and other mechanical systems electrical power consuming equipment (such as electric air heating coils, electric boilers, electric hot water heaters, etc.). g. Auxiliary control devices. h. All control devices (thermostats, pressure switches, flow switches, humidistats, etc.) and make control circuit connections thereto. Work of Division-26 includes (but is not necessarily limited to): All power circuits, including conduit and boxes. All power connections to controllers, switches, motors and other mechanical systems electrical power consuming equipment (such as electric air heating coils, electric boilers, electric hot water heaters, etc.). All remote motor disconnects (remote from the related controller) at all locations required by NEC and connections thereto except those disconnects or combination starter/disconnects which are specified in Division-23 to be provided as part of the equipment itself. All controllers (except those which are generally manufactured or shipped as separate but companion items to Division-23 equipment such as centrifugal chiller starters) install: 2. Furnish: 1. Provide: i. Any and all pneumatic and electronic and electric control devices and electric or pneumatic connections thereto. a. All controllers which are generally manufactured and/or shipped as separate but companion items to Division-23 equipment (e.g., chiller starters). b. All motor starters or combination motor starter/disconnects provided by Division 23.