Site work and paving for a bridge / tunnel in Gonzales, Texas. Completed plans call for site work for a bridge / tunnel; and for paving for a bridge / tunnel.

STATEMENT OF WORK: This project is to repair spalled concrete in the concrete caps and concrete curbs on the east side of the bridge. On the west side of the bridge, spalled or broken concrete curb and parapet to be chipped to sound concrete, steel rebar preserved and replaced as needed and concrete and epoxy installed to restore the guardrail supports. The grout and epoxy to be used will be from the DOTD Qualified Products List (QPL) for this type of work. All bidders should refer to the "amended scope of repair" document for full details. o Project Details: o New guard rail and new metal posts are to be installed (replaced in kind) on west side only. o Existing bolts are to be restored in the repair areas as needed to secure the existing metal posts (for Guardrail) to the curb. o This project is also to remove rotted sections of the timber piles listed below and splice new pilings in accordance with DOTD Timber Bridge specifications. o The project also includes the installation of treated timber pilings and boards needed to secure standalone wingwalls on all four corners of the bridge. This will include 2-12" diameter treated piles and treated 3" oak boards as needed to secure the embankment. o The wingwall lengths will be between seven and ten feet. o Furnish/ installing geotextile fabric and three-inch-thick treated oak boards in the mud walls of both end abutments. o Bent: South Abutment- Pilings to be spliced: #2, #3, and #5 o Bent: Middle Abutment- Pilings to be spliced: #3 and #5 o Bent: North Abutment- Pilings to be spliced: #2 and #5