Site work and new construction of a mixed-use development in Weston, Florida. Working plans call for site work for a water / sewer project; bridge / tunnel; and for the construction of a water / sewer project.

"As per the Owner the Project has been cancelled. Editorial Content Team is actively seeking updated information" Description ****NOTICE OF CANCELLATION FOR SOLICITATION W912EP25R0005**** The funds assurance provided to the BCWPA, C-11, Contract 2 project were supplemental funds appropriated under the Bipartisan Infrastructure Law (BIL) (Public Law 117-58), also known as the Infrastructure Investment and Jobs Act (IIJA).The funding determination was based on the South Florida Ecosystem Restoration (SFER) IIJA Spend Plan, which was approved by the Office of Management and Budget (OMB) in February 2024. However, SAJ has received notification that the IIJA funds initially allocated to this project have been officially reallocated. Consequently, the funds that were previously designated for Solicitation No. W912EP25R0005 are no longer available. Additionally, there are no alternative funding sources identified to facilitate this project. This is a request for information/market survey. This is not a request for proposal, request for quote, or an invitation for bid. This Notice is for the evaluation of PLAs ONLY; it is not a request for competitive proposals. U.S. Army Corps of Engineers, Jacksonville District is cfurrently re-evaluating the potential use of Project Labor Agreements (PLAs) on the "CERP, BCWPA Contract 2 C-11 Impoundment and Mitigation Area A" project. A PLA is defined as a pre-hire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement as described in 29 United States Code (U.S.C.) 158 (f). Federal Acquisition Regulation (FAR) policy states: Executive Order (E.O.) 14063, Use of Project Labor Agreements for Federal Construction Projects, requires agencies to use PLAs in large-scale construction projects (defined as a construction projects with a total estimated cost at or above $35M) to promote economy and efficiency in the administration and completion of Federal construction projects. When awarding a contract in connection with a large-scale construction project, agencies shall require use of a PLA for contractors and subcontractors engaged in construction on the project, unless an exception(s) at FAR 22.504(d) applies. Reference is made to: FAR Subpart 22.5 Use of Project Labor Agreements for Federal Construction Projects; provision, FAR 52.222-33 Notice of Requirement for Project Labor Agreement; and to clause, FAR 52.222-34 Project Labor Agreement. In light of recent recission of the DoD Class Deviation waiving the use of PLA requirements, the Government is seeking additional information on the use of PLAs for this project. This survey is for planning purposes only and shall not be construed as an obligation on the part of the Government. The Government does not intend to award a contract on the basis of this market survey or otherwise pay for the requested information. The Government will not provide a debriefing on the results of this survey. All information will be held in a confidential manner and will only be used for the purposes intended. This market research effort will help in the Government's determination of whether a PLA exception applies. Please consider the following questions in this request: 1) As a qualified contractor for a project of this type, would you be interested in participating in this project Would the requirement of a PLA under this project impact your interest in any way Are you less or more likely (and to what degree) to submit a bid with the PLA included Explain in detail. 2) Do you have knowledge that a PLA has been used in the local area on projects of this kind If so, please provide supporting documentation. 3) Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the referenced project If so, please elaborate and provide supporting documentation where possible. 4) Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed If so, please elaborate and provide supporting documentation where possible. 5) Identify specific reasons why or how you believe a PLA would advance the Federal Government's interest in achieving economy and efficiency in Federal procurement. 6) Identify specific reasons why you do not believe a PLA would advance the Federal Government's interest in achieving economy and efficiency in Federal procurement. 7) Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project. 8) Please identify if you intend to propose on this project subject to a PLA requirement. 9) Will multiple construction Contractors and/or Subcontractors employing workers in multiple crafts or trades be required to complete the anticipated work 10) Do you think requiring a PLA will increase contract costs or contribute to cost savings Why or why not How 11) If you have previously been party to a PLA, approximately how long did it take to negotiate the terms of the PLA Did PLA negotiation delay construction start If so, by how long 13) Any other information you think should be considered regarding the use of PLAs for the anticipated project. Please also provide the following information on projects completed in the last two (2) to five (5) years: 1) Project Name and Location 2) Detailed Project Description 3) Initial Cost Estimate vs. Actual Final Cost 4) Was the project completed on time 5) Number of craft trades present on the project 6) Was a PLA used 7) Were there any challenges experienced during the project This request for information does not constitute a request for proposals; submission of any information in response to this market survey is purely voluntary; the Government assumes no financial responsibility for any costs incurred. Responses will not be considered an offer, proposal, or bid for any solicitation that may result from this Notice. Respondents will NOT be notified of the results of any review conducted or the capability statements received. Please send responses and/or questions to Ligaya Lowe at ligaya.m.lowe@usace.army.mil and Manuela Voice at manuela.d.voicu@usace.army.mil by 2:00 PM (EDT) Monday, 23 June 2025. All responses to this Special Notice will be evaluated and used in determining acquisition strategy. The U.S. Army Corps of Engineers, Jacksonville District, is issuing a Request for Proposal (RFP) to award as a Design-Bid-Build, Single, Firm-Fixed Price, Construction Contract on a full and open basis utilizing FAR 15 procedures and the Bifurcated Best Value Tradeoff (BVTO) Approach also referred to as the Staggered Approach. The Bifurcated Best Value process means that a portion of technical proposals will be due first. At that time (Stage 1), technical proposals will be evaluated against Factors 1 and 2 (Technical Merit and Past Performance) in the solicitation. Once the 100% design is completed, an amendment will be issued for 100% ready to advertise design and offerors will have about 14 days to submit their proposals (Stage 2) for Factors 3 and 4, Small Business Participation Plan and Price. The Broward County Water Preserve Area (BCWPA), Contract 2 project consists of a portion of the overall C-11 Impoundment project. Contract 2 consists of construction of dam and levee embankment, a mitigation area, water control structures, environmentally sensitive area (ESA) systems, lake backfill, drainage conveyance, ancillary features, and associated clearing, grubbing, planting, borrow, and material processing. Contract 2 is the second of three construction phases (combined with an initial land clearing Contract 2.1 and future Contract 3) to complete the overall C-11 Impoundment component of the BCWPA project. The overall completed C-11 Impoundment will be an above-ground earthen reservoir targeted to have a total storage of 4,600 acre-feet with an effective interior area of approximately 1,053 acres and a normal pool water storage depth of approximately 4.7 ft. The Contract 2 dam embankment (D-511) will have an approximate height of 15ft (crest elevation of 18.8 ft NAVD88). The Contract 2 portion of D-511 embankment will include roughly 4,800 ft of slurry wall along the southern alignments between stations 111+00 to 146+00 (east) and stations 204+00 to 218+00 (west). The slurry wall will be 41 ft tall (EL 6.0 ft NAVD88 to EL -35.0 ft NAVD) with a typical width of 2.5 ft. The proposed Mitigation Area A, is located north of the impoundment. It will 113 acres of wetland marsh. Water levels within the mitigation area will fluctuate approximately 1.0 ft above average ground elevation (5.3 ft NAVD88). The levees surrounding the mitigation area will have an approximate height of 3 ft (crest elevation of 7.3 ft NAVD88).Contract 2 includes 12 total Water Control Structures:- Gated Culverts S-506A, S-508B, S-508D, and S-511- Ungated Culverts S-500A, S-505E, S-506B, S-508A, and S-509-Fixed, Broad-crested Weirs S-505B, S-505C, and S-505F. There are two environmentally sensitive areas (ESAs) which are to be protected during construction and ultimately excluded from the project by means of embankment alignment. The ESAs will be protected from disturbance during construction and will be avoided by completed project features. Contact 2 includes a requirement to backfill the existing Central Lake and an existing borrow area. These features are existing quarry pits estimated to be up to 55 feet deep and filled with water. Backfill of the Central Lake and Borrow Area will primarily consist of onsite muck material. However, the Contractor will be provided approximately 10,800 cubic yards of stockpiled limerock aggregate, located adjacent to SW 26th Street and the proposed construction staging area, which is approved to be placed in Central Lake. Contract 2 will require continuous stormwater management and conveyance of an approximate two square-mile drainage area north of the project site, which flows southward through the project site, plus any stormwater generated within the Contract 2 limits for the duration of the contract. Since stormwater flows will ultimately need to pass south through the future Contract 3 project limits for discharge into the C-11 Canal, stormwater management will include the following control requirements:- Stormwater system will convey a 100-year storm to the existing A/5 Canal outfall at the C-11 Canal.- Contractor will construct a temporary shallow drainage diversion ditch from the eastern C-511 Canal to the existing A/5 canal. The diversion ditch will be located along the boundary between the Contract 2 and Contract 3, in a zone of temporary construction limit for future resumption by others.- Contractor must not construct S-505F broad-crested weir until the eastern section of C-511 and the temporary diversion ditch to the existing A/5 canal are complete. Other project features and activities include clearing, grubbing, planting, borrow, material processing, boat ramps, soil cement embankment armoring, emergency stockpiles, instrumentation and monitoring stations, wetland preservation/protection, erosion control, and debris disposal. A pre-proposal conference/site visit will take place, and details have been posted in Volume 1 of the solicitation. Interested contractors are highly encouraged to attend and must follow conference registration and access requirements shown in the solicitation. NAICS Code is: 237990, Other Heavy and Civil Engineering Construction. The Small Business Size Standard is $45 million. DFARS 236.204 - Disclosure of the Magnitude of Construction: over $500,000,000.00 The anticipated period of performance associated with this requirement is: 1,947 calendar days after receipt of the Notice to Proceed (NTP). The contractor shall commence work within 90 calendar days after receipt of the NTP.THIS IS AN UNRESTRICTED REQUIREMENT. ALL RESPONSIBLE OFFERERS ARE ENCOURAGED TO PARTICIPATE. The solicitation has been issued in electronic format only and has been posted on the Sam.gov website at https://sam.gov/ via PIEE. In order to receive notification of any amendments to this solicitation, interested vendors must REGISTER AS AN INTERESTED VENDOR on the Sam.gov website at https://sam.gov/. If you are not registered, the Government is not responsible with providing you with notification of any amendments to this solicitation. You must be registered in the System for Award Management (SAM) in order to be eligible to receive an award from this solicitation. For additional information, please call 866-606-8220 or visit the SAM website at https://www.sam.gov/. All inquiries must be in writing via ProjNet. Instructions on how to access ProjNet will be included in the solicitation. All answers will be provided in writing via ProjNet. The only authorized transmission method for a proposal in response to this solicitation is electronically via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. NO OTHER TRANSMISSION METHODS (EMAIL, FACSIMILE, REGULAR MAIL, HAND CARRIED, ETC.) WILL BE ACCEPTED. The offers must be received by the Government by the date/time specified in the solicitation. Offerors shall submit their proposal via the PIEE website Solicitation Module using the following link: https://piee.eb.mil/. Instructions on how to submit a proposal can be found using the following link: https://pieetraining.eb.mil/wbt/sol/Posting_Offer.pdf. PN - W912EP24B00140001, W912EP24C0022, W32CS542547592, S235512