Site work and outdoor lighting for a playground / park / athletic field in Palatka, Florida. Completed plans call for site work for a playground / park / athletic field; and for outdoor lighting for a playground / park / athletic field.

The work shall consist of, but not limited to, removing and replacing sports lights on 4 (four) fields, Field #1, Field #2, Field #3, and Field #4 with LED sports lights, replacing junction box connections at the top of each pole, furnishing of all tools, machines and equipment, and all incidentals necessary to complete the work and rewire to existing poles and brackets. Questions concerning the specifications may also be emailed to Leigh Doran, Procurement Supervisor at Leigh.Doran@putnam-fl.gov. Answers to questions received will be posted online with the bid documents. Questions must be received at least 7 days prior to bid opening. This project is to remove and replace all sports lights on 4 (four) fields, Field #1, Field #2, Field#3, and Field #4 with LED sports lights. 2. Installation of LED light fixtures should provide a maintained minimum average quantity of 50 horizontal footcandles on the infield and a maintained minimum average quantity of 30 footcandles on the outfield. Design calculations to arrive at maintained light levels should include a maintenance factor no greater than .8 and adjustments for actual tilt factor. Quality The quality of the lighting should be determined on a basis of uniformity and smoothness. a. Uniformity of the lighting shall be such that on the infield, the highest measure of quantity of light should not be greater than 2 times the lowest quantity. For the outfield measurement, the highest quantity of light should not be greater than 2.5 times the measurement of the lowest quantity of light. b. Over the entire area of the infield and outfield, the change in the quantity of horizontal footcandles should not occur at a greater rate than 10 percent per 10 feet, except for the outside perimeter readings which may change at a greater rate. Contractor is required to submit LED light specifications and lighting diagram showing compliance with required footcandle quality. 3. The contractor shall maintain a safe work area around the facility. 4. The Contractor shall follow all applicable County, State and Federal codes and regulations. The contractor is responsible for obtaining all permits required through the County. 5. Contractor will be responsible for removal and disposal of all old lighting materials and debris. 6. Contractor shall provide all tools and equipment that are necessary to complete the project.