Site work for a municipal facility in Marion, Iowa. Completed plans call for site work for a municipal facility.

Cedar Rapids Linn County Solid Waste Agency (Owner) is requesting Bids for the construction of the following Project: Site 2 - Scale Improvements Project 10347064 The Project includes the following Work: Full removal and replacement of the inbound scale; removal and replacement of the outbound scale pivots, bearings, and suspension kit; removal and replacement of the scale guide rails; installation of heat trace on all scales. Bids are requested for the following Contract: CRLCSWA Site 2 - Scale Improvements Project. The final completion date will be dependent on the receipt date of the inbound scale. Downtime of the inbound scale shall be limited to one week or less. Contractor shall coordinate with the site to schedule replacement window. Replacement shall not take place during inclement or cold weather (shall not take place from January to March, unless approved by the Owner). Site personnel will be present at commercial scale during scale replacement. All questions in regard to this project will need to be submitted by Tuesday October 25, 2022, at 5:00 PM local time. Bidders shall contact HDR (Katie.Kinley@hdrinc.com and Morgan.Mays@hdrinc.com) for all questions directed towards this project. For all further requirements regarding bid submittal, qualifications, procedures, and contract award, refer to the Instructions to Bidders that are included in the Bidding Documents. PREBID MEETING INFORMATION A pre-bid meeting has not been scheduled for this project. The Work to be performed under this Contract includes constructing the Work broadly described below, in accordance with the Contract Documents, with all related appurtenances. Work shown on the Drawings, or indicated in the Specifications, or indicated elsewhere in the Contract Documents is part of the Work, regardless of whether indicated below. The Work includes, but is not limited to, the following: 1. Scale Project. a. Removal and replacement of inbound scale. b. Removal and replacement of outbound scale pivots, bearings, and suspension kit. c. Removal and replacement of guide rails. d. Installation of traffic signal and intercom. e. Installation of heat trace on all scales. f. Coordination with site, other contractors, subcontractors. g. Others: See Drawings and Specifications.