Site work for a bridge / tunnel in St. Albert, Alberta. Completed plans call for site work for a bridge / tunnel.

The work to be undertaken is generally described as: Guardrail Repairs in the City of St. Albert and includes, but not limited to: Repairs to existing guardrails in 3 different locations St. Albert Trail/Neil Ross Road Ray Gibbon Drive/Township Road 540A Cunningham Road (near Stanley Drive) St. Albert Trail Bridge pedestrian railing repairs. The work to be undertaken is generally described as: Guardrail repairs in the City of St. Albert and includes work to be undertaken at 4 separate locations throughout the City. Guardrail Repair - St. Albert Trail/Neil Ross Road Remove and dispose of damaged sections of W-Beam Remove and replace 3 posts Awarded value not released for publication. Supply and install new sections of W-Beam Supply and install new Energy Absorbing Terminal Guardrail Repair - Ray Gibbon Drive/Township Road 540A Remove and salvage damaged section of W-Beam Remove and replace 2 posts Re-install salvaged section of W-Beam Guardrail Repair - Cunningham Road (near Stanley Drive) Remove and dispose of damaged sections of W-Beam Remove and replace 2 posts Supply and install new sections of W-Beam Pedestrian Railing Repair - St. Albert Trail Bridge Straighten bent top and bottom rails (HSS 76x51x3.2) May require cutting and splicing with backing plates Repair the crack in the bottom rail at the center post Gouge to sound metal and re-weld Remove and replace 9 damaged pickets Repair sheared post (HSS 51x51x4.8) Cut embedded section flush with concrete curb Remove and replace broke post on bottom rail Install base plate on new HSS post Secure base plate with 4 concrete anchors over existing insert Coat field welds with 2 coats of zinc rich galvanizing spray Documents can be obtained from https://stalbert.bidsandtenders.ca/