Site work and new construction of a fire / police facility in Abilene, Texas. Completed plans call for the construction of a 13,328-square-foot fire / police facility; and for site work for a fire / police facility.

Project scope includes but is not limited to construction of a new fire station with associated site work and utilities located at the Y intersection of FM 707 and Spur 707. The bidder has the following options for purchasing Contract Documents: Copies of the CONTRACT DOCUMENTS must be ordered online at www.jacobmartin.com. Orders for CONTRACT DOCUMENTS may include hard copies for pick up, mail out or digital download via www.jacobmartin.com. Upon verification of online payment, hard copies may be picked up at Jacob & Martin, LLC, located at 3465 Curry Lane, Abilene, TX 79606. Cost for hard copies of the CONTRACT DOCUMENTS and 11x17 PLANS will be $100.00. Cost for digital download of CONTRACT DOCUMENTS will be $0.00 SCOPE OF WORK Complete systems of DDC/EMS controls and automation shall be furnished and installed for the various systems in accordance with the plans and specifications. The system shall be an extension to and 100% compatible with Owners existing Energy Management System (EMS). The systems shall be direct digital control (DDC), and shall be complete including, but not limited to, control and instrumentation equipment, automation equipment, communication equipment, and supporting electric/electronic control installation. New DDC System shall be Schneider Electric EcoStruxure Series DDC Building Automation and Energy Management System. New DDC System shall be a turn-key installation, with components, system engineering, installation, programming and supervision provided by a qualified Automatic Control Contractor that is approved by the Owner and the Engineer. New system shall include direct DDC control for all VRF heat pump fan & coil units as specified herein. DDC shall also be interfaced with the VRF heat recovery system as follows: DDC system shall be interfaced with new VRF control system to provide remote EMS operator interface with the new VRF heat recovery systems to be provided under this project. The VRF manufacturers representatives will furnish and install a complete VRF digital control system as noted on the drawings and specified under Section 23 8100, to include VRF communication network interconnecting all units and systems throughout the building, with VRF central controller and BACnet interface gateway. DDC system shall be interfaced with VRF control system via gateway through building Ethernet data communication. DDC Contractor shall provide full and effective interface with the new VRF control system between the central DDC controller and VRF gateway, to provide remote EMS operator interface for all new VRF units including VRF heat pump units, heat recovery units, and indoor heat pump fan & coil units. DDC Contractor shall develop and establish all new control programming, unit and system graphics, operating schedules, setpoints, monitoring data, etc., through the remote EMS operators workstations for all new VRF equipment and systems. DDC Contractor shall carefully coordinate with Mechanical Contractor and VRF manufacturers representatives and control technicians to provide complete and proper interface with VRF control system. A new 13,328 SF Fire Station with associated sitework and utilities located at the "Y" intersection of FM 707 and Spur 707.