Privately Funded
Bidding Soon
Documents Available
Publicly Funded
Addenda Available
Post-Bid
Saving Project...
This is a service / maintenance or supply contract in Cannon AFB, New Mexico. Contact the soliciting agency for additional information.
1. This is a sources-sought announcement. This notice is for market research purposes only and IS NOT a request for proposal, quotation or bid. The Government will not reimburse respondents for any costs incurred in preparation of the response to this announcement. The 27 Special Operations Contracting Squadron (27 SOCONS) is seeking sources with current relevant qualifications, experience, personnel, and capabilities for a construction single award task order contract (SATOC). 27 SOCONS, requests letters of interest from potential prime construction contractors (small and large businesses). 2. Project Description: This SATOC would mainly consist of minor construction, maintenance, repair, and design/build projects at Cannon Air Force Base (CAFB) in Curry County, New Mexico and Melrose Air Force Range (MAFR) in Roosevelt County, New Mexico. Construction projects will be awarded by individual task orders on an as-needed basis within a five-year ordering period estimated to start in Fiscal Year (FY) 2024 and go through FY 2029. The contract ceiling is estimated to be $25M over the five year period. a. The scope of this contract will encompass Design-Build renovation and new construction projects. It may also include a broad variety of minor repair, modification, rehabilitation and/or alterations of existing buildings. The contractor is encouraged and expected to use innovative approaches to efficiently and effectively provide support which complies with project requirements in a timely manner, at a reasonable cost and in a way that fosters pride and ownership in the work performed. b. The salient characteristics of these projects consist of the following: Vertical construction, full complement of construction disciplines including foundation, infrastructure, site utilities, superstructure, building systems. Features of work may include interior/exterior mechanical, electrical, fire protection, HVAC, architectural finishes, concrete, plumbing, carpentry, and roofing. c. Performance may further require, but not be limited to demolition, geo-technical investigations, infrastructure projects, interior fit-up, communications, and security and force protection (AT/FP) projects. 3. The Contractor shall be required to perform all work in accordance with the access and security requirements of the installation and specific facilities. 4. Responders should also address all the following in their submittal: a. Interested prime contractors should submit a narrative demonstrating their experience in task order construction type contracts. b. Provide firm's name, address, point of contact, phone number, e-mail address, and your CAGE code if your company is currently registered with the SAM.gov database. If not, indicate if it has been registered or if you plan to register. c. In consideration of NAICS code 236220, with a small business size standard in dollars of $45.0M, indicate which of the following small business categories your business is classified under: Small Business, Veteran Owned Small Business, Service-Disabled Veteran Owned Small Business, Small Disadvantaged Business, Woman-Owned Small Business, HUBZone Small Business, or 8(a) Business. d. Provide a letter from the surety regarding the bonding capability for a single contract action and aggregate of the interested prime contractor. e. Provide evidence that your firm has successful subcontractor relations in CONUS. f. Provide details of similar completed contracts to include at a minimum, project references, (including owner with phone number and email address), contract number, brief description of project, dollar value, what type of work and the percentage of work your firm provided on these contracts. g. Provide details of experience responding to multiple RFPs at once and performing multiple projects at once in varying locations. 5. The Government would also like Industry feedback on the following: a. The Government has historically relied on R.S. Means or similar type unit pricing methods. Does Industry have any input on their decision or any other ideas on the pricing mechanism as a potential replacement b. Cannon AFB, NM and MAFR, NM subcontracting base is limited. Does Industry have any input on the ability to manage subcontractors' performance across multiple construction disciplines on several task orders at once c. What evaluation factors would you recommend for the source selection criteria d. Comments will be shared with the Government project team, but otherwise will be held in strict confidence. 6. Submission Instructions: THIS NOTICE IS NOT A REQUEST FOR PROPOSAL. It is a market research tool being utilized to determine the availability of potential qualified contractors before determining the method of acquisition. In addition, this sources-sought is not to be considered as a commitment by the Government, nor will the Government pay for any information solicited or delivered. 7. Interested parties who consider themselves qualified to perform the above-listed requirement are invited to submit a response to this Sources Sought Notice NLT the time posted in this notice. All responses under this Sources Sought Notice must be emailed to: Donald Mills via email donald.mills.11@us.af.mil and SrA Charlee Maier via email: charlee.maier@us.af.mil a. Responses should be no more than eight (8) pages. b. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. 8. IMPORTANT NOTICE: IAW DFARS 252.204-7012, Safeguarding Covered Defense Information and Cyber Incident Reporting. Contractors are required to implement NIST SP 800-171. At time of award, the awardee must be registered in the Supplier Performance Risk System (SPRS) and have at least a Basic NIST SP 800-171 DoD Assessment that is not more than 3 years old. The method of contractor selection has not been determined at this time.
Conceptual
Military
Public - Federal
Service, Maintenance and Supply
Plans and Specifications are not available for this project. If that changes, they will be made available here.
Trades Specified
Division 00 - Lorem Ipsum
Find More Local Projects
Within 75 Miles of This Project
One Low Price
- One license and one market
- Details and key contacts on all bidding projects
- Organize your pipeline with a digital bid board
- Automatically match opportunities to your profile
- Saved searches deliver daily project leads to your email inbox
Market Pricing Around
- All Starter Product functionality
- Access to all documents (plans, specifications, and addenda)
- Access to planning projects
- Access to contact information
- Ability to Export
You’ve Reached the Free View Limit
Want to see more project and bidder data in your market? Check out our product options and see what works best for you and your business.
Come back in [[refresh_days]] to get [[project_count]] more free projects.
February 28, 2024
Multiple Locations, Cannon AFB, NM
Related To This Project
Cannon AFB, NM
Bid Date: Mar 13 2023
Cannon AFB, NM
Bid Date: Mar 10 2023
Cannon AFB, NM
Bid Date: Mar 10 2023
Cannon AFB, NM
Bid Date: Jun 14 2023
Cannon AFB, NM
Bid Date: Jun 08 2023
Cannon AFB, NM
--
Cannon AFB, NM
Bid Date: Aug 14 2023
Cannon AFB, NM
Bid Date: Sep 30 2022
Cannon AFB, NM
--
Cannon AFB, NM
--
Cannon AFB, NM
Bid Date: Jun 16 2017
Cannon AFB, NM
Bid Date: Sep 16 2022
Cannon AFB, NM
--
Cannon AFB, NM
Bid Date: Aug 15 2022
Recently Viewed
--
--
--
--
--
--
--
--
--
--
Try it free. The data you need to build the relationships you want.
Sign up now to get free company and project data. No payment required.
Get the right
data with Project Intelligence
Project Shared
with
example@example.com
Choose what you would like to do.
Seen enough? Want to see more? Subscribe on your own or talk to one of our sales reps.
What is your business type?
We have a wide variety of products that are purpose built for certain business types.