Site work and paving for a road / highway in Sauk City, Wisconsin. Completed plans call for site work for a road / highway; and for paving for a road / highway.

The project work consists of chip seal surfacing and wedging on various Town roads. A separate Bid must be submitted for each road. The bidder shall recommend and clearly specify the following information on each bid form. Chip Seal Bituminous material: Chip Seal Asphalt Cement PG-58-28 with no cutback or as compatible with aggregate Cover aggregate 3/8" washed, fractured pea stone aggregate or as requested by project. (Town will consider other cover aggregate if price is provided) Wedge Asphaltic Material - Type E-1 Hot Mix Asphalt for overlays and Wedging. All work must be completed by August 31, 2023 Questions concerning the road shall be directed to the Town Patrolman at 608-963-6084 CHIP SEAL COAT A. Each Road shall constitute a separate project. A separate bid must be submitted for each road. B. The bidder shall recommend and clearly specify the following information on each bid form. Bituminous material: Asphalt Cement PG-58-28 with no cutback or as compatible with aggregate Cover aggregate 3/8" washed, fractured pea stone aggregate, (Town will consider other cover aggregate if price is provided (see Project 3) Contractor provides aggregate Material Quantities to be used: Asphalt 0.35 gallons MIN. per Square Yard Aggregate 24 pounds MIN per square Yard Final cost of road based on roads actual width. Town will patch as necessary prior to Chip Seal The Town Board reserves the right to reject any bids and to accept the bid or bids deemed to be the most advantageous to the Town. Project 1 Chip Seal and possible center wedging Road Name: Inama Road Start/End Points: CTH Y - STH 188 Total length of project area: 3.44 miles Project 2 Chip Seal This Road Requires Center Wedging prior to Sealing (Appox. 500 ft) See Town Patrolman for limits. Road Name: Hornung Road Start/End Points: Inama Road - CTH Y Total length of project area: 2.47 miles Project 3 Chip Seal These Roads Require Center Wedging prior to Sealing (Appox. 500 ft) See Town Patrolman for limits. Mill joints where necessary. Note to Bidder: Please provide an alternate cover aggregate (urban) for these locations for the Towns consideration. Road Name: Numerous Start/End Points - Tetiva and Blackhawk Estates Excludes Lone Cedar and Blackhawk Lane Total length of project area: 1.31 miles Project 4 Wedging Road Name: Privett Rd Various Locations - See Town Patrolman for locations Total Length of project area: Approx. 100 Ft. Average Road Width ____22___ feet