This is a service / maintenance or supply contract in Schaumburg, Illinois. Contact the soliciting agency for additional information.

This project requires 23% DBE participation, or if the contract goal is not met, documented evidence of good faith efforts. The Complexity Factor for this project is 0. The Consultant who is selected for this project and all Subconsultants the Prime Consultant will be using are scheduled to attend an initial meeting on July 21, 2023, at 10:00 AM at the Region One/District One Office in Schaumburg. Phase I engineering services are required to provide field and office resources to prepare surveys of various roadway projects throughout the District by individual work orders. This includes, but is not limited to, route surveys, topographic surveys, cross-sections, profile, establish existing and proposed centerline alignments, drainage inverts, locating and verify existing right-of-way monument, plotting of field information, mapping projects, and any other tasks deemed necessary to complete the work in accordance with the Department's Survey Manual and District One procedures. All survey information will be acceptable for design purposes and formatted per IDOT specifications. All data collected electronically or plotted will comply with IDOT CADD standard and use standard IDOT Survey Point Codes and Linking Codes. Some GIS and database work might also be required. The Consultant must also have a QA/QC plan to review internal work as well as assigned IDOT projects. Projects or tasks requiring CADD are anticipated to be completed using 3D modeling utilizing Bentley’s Open Roads Designer software (or equivalent) and our current CADD environment in accordance with the latest IDOT Computer Aided Design, Drafting, Modeling and Deliverables (CADD) Manual. Questions concerning this Bulletin should be directed to: E-mail: DOT.ConsultantServices@illinois.gov Or mailing address: Bureau of Design and Environment 2300 South Dirksen Parkway Attn: Consultant Unit Room 330 Springfield, IL 62764 The Prime firm must be prequalified in the Special Services (Surveying) category to be considered for this project. Statements of Interest, including resumes of only the key people noted above, must be submitted electronically to the Central Bureau of Design and Environment through the Engineering Prequalification and Agreement System (EPAS) The estimated engineering fee for this project is $500,000. The completion date for this contract will be 60 months after authorization to proceed. The method of contractor selection has not been determined at this time. IDOT - 7 - RFQ - Various Phase I Projects, Various Routes, Various Counties, Region One/district One