Remodeling and renovation of a military facility in Hill Air Force Base, Utah. Completed plans call for the remodel of a military facility.

The purpose of this part of the standard is to provide technical guidance and outline technical requirements for the more typical aspects of the mechanical engineering design on Hill Air Force Base. The information provided shall be utilized by mechanical designers in the development of the plans, specifications and calculations, and shall serve as the minimum mechanical design requirements. Project conditions may at times dictate the need for designs that exceed these minimum requirements. Hill Air Force Base is located near Ogden Utah approximately 30 miles north of Salt Lake City at an elevation of 4700 Ft above sea level. Questions resulting from this FOPR, or site visit, shall be in writing and submitted no later than 6 July 2023 1000 hours Mountain Standard Time. Design-build services to include removal of the single-story existing offices & breakroom and the design and construction of a new two-story office with approximately 650 SF on each floor for a total of about 1,300 SF. The new office space shall be within Building 507 and modification to the superstructure of building 507 is not anticipated. *The bid list for this project may be incomplete. If you have been invited to bid on this project by the owner, please notify our editorial staff at contentcase@constructconnect.com. *This project is being bid by invitation only. If you have been contacted by the owner to bid on this project as a general contractor, and would like to be listed below, please notify our editorial staff at contentcase@constructconnect.com.