Site work and paving for a sidewalk / parking lot in Moline, Illinois. Completed plans call for site work for a sidewalk / parking lot; and for paving for a sidewalk / parking lot.

**As of July 18, 2023, this project has not yet been awarded. Board approval is expected on July 18th. A notice to proceed will be issued after board approval..** The purpose of this IFB is to solicit bids from responsive and responsible bidders to furnish labor, supervision, materials, tools, equipment, incidentals and services including traffic control as necessary- to complete the removal and replacement of concrete curbs and gutters, parking lots, and/or miscellaneous concrete street repairs throughout the Airport property as may be requested by airport management an indefinite delivery and indefinite quantity manor through December 31, 2025. Any questions concerning this Bid must be submitted in writing by mail, fax or email at least THREE WORKING DAYS prior to the bid deadline. Requests submitted after thattime WILL NOT be considered. All inquiries must be directed to the person indicated on the cover page. General Scope of Work: The MAA desires to solicit bids for concrete work matching the price schedule outlined in Part 4 of this package. The successful contractor will provide concrete services as requested through December 31, 2025, at the prices submitted in Part 4. All work listed shall be performed in a thorough and professional manner and in accordance with accepted industry methods and practices. All work shall be in strict compliance with all local and state codes, ordinances, laws, and policies. Work shall include removal, disposal, and replacement of concrete roadways, curbs, gutters, and associated improvements as noted herein. Work shall include all labor, equipment and materials to perform full depth repairs by removal, disposal, and replacement of concrete in the marked areas. Work shall meet standard Illinois DOT specifications using DOT 72-hour mix except where other mix designs are specified. Sidewalks shall use wire mesh reinforcement. Some areas may be high traffic areas requiring a short closure for operational needs. If necessary, the contractor shall propose mix designs specifying set times needed to ensure surfaces are able to be returned to full strength use within time frames specified. The price quoted shall include all labor, materials, equipment, and other costs necessary to fully complete the services in accordance with specifications of this request for bid to include but not limited to traffic control, concrete covering/tarping, cleanup etc. As required for sidewalk approaches ADA detectable warning (tactile) mats shall be cast in place at sloped sidewalk and crosswalk intersections with roadways. The Contractor shall construct curb ramps in compliance with current ADA standards. Concrete work shall be sequenced to ensure at least one lane of traffic is available at all locations remaining open to vehicle traffic. All curbs and gutters must be pinned prior to pouring new concrete. Any roadway patch must be pinned no closer than 18 inches apart and no greater than 24 inches apart prior to pouring new concrete. Sidewalk joints shall be tooled to match existing conditions. Joints shall be constructed at all radius points, driveways, and at adjoining structures. Crack-control joints shall be constructed not more than ten (10) feet apart. Joints shall be made by the use of steel dividers, scoring or saw cutting to a depth of not less than one and one-half (1-1/2) inches and matching joints in adjacent sidewalks and/or parking lots and streets. The concrete shall be cured by the curing compound method