Renovation of a multi-residential development in Rock Island, Illinois. Completed plans call for the renovation of a multi-residential development.

Scope of Work The bidder shall submit a project plan using the design standards below that is in compliance with all applicable HUD, EPA, and State of Illinois regulations as well as all local building and zoning codes. The plan must include a clear project timeline and budget with line item costs. The contractor shall act as the general contractor for the project using subcontractors as required. Subcontractors that will be required should be clearly identified in the project plan Install Tyvek house wrap over all the existing wood siding over lapping 6, tape all the seams. Install fan fold over the house wrap taping all the seams installed with cap nails. Bend white break metal around the bottom of wall installing over the wrap and fold and returning to the foundation. Install double 4 vinyl siding choice of colors the homeowner selects from samples provide by the contractor. All wall and floor penetrations shall have either a light block or split trim installed and caulked with a color match. All top course pieces must be snap-locked into a utility trim preventing siding from blowing off. Install missing soffit and fascia mostly on the room addition. Install new white gutters and downs through out the entire house. Install 6 tail pipes off the downs with hinged flip-ups securing the tails from being blown off. Minimum 2 straps per 8 of down securing to the wall. All Connections must have at least 2 white screws per joint. The contractor shall have 30 days to complete the work from the date of contract signing.