Site work for a mixed-use development in Winnipeg, Manitoba. Completed plans call for site work for a swimming pool.

The Work to be done under the Contract shall consist of the supply and installation of new 60 mil PVC pool membrane and associated Works at Kildonan Park Outdoor Pool - 2015 Main Street. The major components of the Work are as follows: (a) To remove and dispose off site the existing PVC membrane and all of its associated pool components from existing concrete pool tank walls and floor. (b) Provide means of disposal and storage of disposed materials, debris and other materials in close proximity to the pool work site. (c) To complete all necessary localized repairs to existing concrete pool substrate surfaces to accept new pool PVC membrane and associated pool components, as required. Deterioration of exposed concrete surfaces are readily identified by sounding surveys (hammer sounding) and visual inspection. This test method is a powerful tool for identifying, mapping and quantifying deterioration within the cast-in-place concrete, and recognized by the American Concrete Institute and the International Concrete Repair Institute. (d) All the above work identified in D2.2(c) shall be covered in Part E, in conformance with Clause E3 Cash Allowance for Additional Work. For the purposes of budgeting and planning for cash allowance as specified in Clause E3, the Contract Administrator recommends allowance for a 20% increase in area to account for growth in the size of the repair area which inevitably occurs during demolition. (e) Any additional testing methods such as compressive strength, tensile bond, chloride-ion concentration, air void analysis, etc., if required, shall be the responsibility of the City. (f) To broom clean, tidy and sanitize pool surfaces and void of all loose debris as required to accommodate new PVC pool membrane, as per manufacturers specifications and written instructions. (g) Application of new 60mil PVC pool membrane at pool tank floors and walls, termination to be at top of pool walls below coping, as per manufacturers specifications and written installation instructions. (h) All penetrations shall be terminated with compression flanges. (i) Complete additional perimeter caulking, detail work, finish work to make a complete watertight installation. (j) To supply and install pool products which shall include, but not limited to the following: PVC coated weld track, 150 mil anti-microbial fleece underlay membrane, 60 mil nylon reinforced PVC membrane lining, compression flanges and liquid PVC seam sealer. (k) Replacement of main drain, skimmers, return outlets/heads and related piping which were found to be in deteriorated condition following demolition of existing pool liner in pool tank. to meet the current requirements of the plumbing code as well as the Public Health Act and Regulation MR132/97. (l) Bonding/grounding of pool components as required by electrical code and the Public Health Act and Regulation MR132/97. (m) To supply and install depth markings and demarcation lines on vertical walls and pool base floor at required points. (n) To supply and install quantity of five (5) racing lines and end targets. (o) Pool and deck markings conforming to 2015 City of Winnipeg Accessibility Design Standards (WADS) and Manitoba Health Swimming Pools and Other Water Recreational Facilities Regulation (MR 132/97). (p) Water pressure tests for the supply, return and main drains for any potential leaks and commissioning of new membrane and all new pool components. (q) Final complete vacuuming, cleaning and washing of all surfaces affected by demolition and construction work suitable for pool filling. (r) Drawings presented in Part E, Clause E1, are provided as an aid, and all information in them shall be verified by the Contractor to ensure accuracy. Any changes resulting fromrenovations, maintenance, damage or deterioration since that time would not be included. Official bid documents must be obtained from www.merx.com and bid submissions must be done through the Merx platform. Bidder also included: RECA Vinyl Works bid value $569,085.16 Award is subject to final approval.