Renovation of a municipal facility in Saint Joseph, Missouri. Completed plans call for the renovation of a municipal facility.

Site Address: 701 James McCarthy Drive Site Directions: Located on Missouri Western State University Campus The contractor shall provide materials and labor to complete the following: 1. Remove 14- 10'w x 10'h and 1- 12'w x12'h overhead doors and all hardware associated with them. 2. Be responsible for proper off-site disposal of all old material and waste from the project. 3. Plan project accordingly to maintain building security at the close of every workday. 4. Verify all field measurements. 5. Key all lock assemblies to owner provided key. Tumbler info shall be provided by owner upon request. 6. Install: Thirteen C.H.I. model 3240 or approved equivalent, uninsulated,10'w x 10'h, 10,000 cycle torsion spring, manual open, ribbed panel commercial overhead doors, and tracks with hardware. o Standard lift, minimum of 24-gauge steel exterior, white in color. o 14ga hinges and 16ga 2" track (15-degree radius) with continuous jamb angle. o 18-gauge center stile and ends. o Case hardened steel tire rollers, 10 ball bearing, on long solid shaft. o Horizontal track to be reinforced with 13-gauge angle according to size and weight. o Install track stop spring bumpers on all manual open doors. o Install white vinyl weather strip on all doors. o Install centered locking hardware with dual locking bars. 7. Install: One C.H.I. model 3252 or approved equivalent, R-8 value insulated, 10'w x 10'h, ribbed panel commercial overhead door, 10,000 cycle torsion spring, manual open, 2- 24" x 6" insulated clear windows at 5-6ft height, and track with hardware. o Standard lift, minimum of 25-gauge steel exterior, white in color. o 1 1/2 inch polystyrene steel backed insulation. o 14ga hinges and 16ga 2" track (15-degree radius) with continuous jamb angle. o 18-gauge center stile and ends. o Case hardened steel tire rollers, 10 ball bearing, on long solid shaft. o Horizontal track to be reinforced with 13-gauge angle according to size and weight. o Install track stop spring bumpers on all manual open doors. o Install white vinyl weather strip on all doors. o Install centered locking hardware with dual locking bars. 8. Install: One C.H.I. model 3252 or approved equivalent, R-8 value insulated 12'w x 12'h ribbed panel commercial overhead door, track with hardware, 10,000 cycle torsion spring, Liftmaster model T501 commercial opener- trolley rail-1/3 hp-115V-remote control- 3 button indoor surface mount station-commercial photo eyes, and 3- 24" x 6" insulated clear windows at 5-6ft height. o Minimum of 25-gauge steel exterior, white in color. o 14-gauge low head room track conversion (See photos after Section 1 Summary) o 1 1/2 inch polystyrene steel backed insulation. o Install approved electric opener with push button, keypad, and remote function. o 14ga hinges and 14ga 2" track with continuous jamb angle. o 18-gauge center stile and ends. o Case hardened steel tire rollers, 10 ball bearing, on long solid shaft. o Horizontal track to be reinforced with 13-gauge angle according to size and weight. o Install white vinyl weather strip on all doors. o Install centered locking hardware with dual locking bars.