Site work and paving for a road / highway in Springfield, Vermont. Completed plans call for site work for a road / highway; and for paving for a road / highway.

Location: Beginning in the Town of Springfield at Mm 41.400 and Extending Northerly Along Interstate I-91 (Southbound Lane Only) for a Distance of Approximately 132,369.60 Feet (25.070 Miles) to Mm 66.470 in the Town of Hartland. Type of Construction: Work to Be Performed Under This Contract Includes Surface Preparation Involving Patching, Pot Hole Repair, Crack Sealing, Fine-milling and Inlaying With Bonded Wearing Course on the Existing Interstate Typical, Pavement Markings, Guardrail, And Other Highway Related Items. This Contract shall be completed on or before September 13, 2024. Electronic bid bond to be submitted in the amount of 5% of the Contractor's bid. Bidders are hereby notified that only electronic bids will be accepted by the Agency For this proposal the Engineer's Estimate is Category F $5,000,000 - $10,000,000 During the advertisement period, all questions shall be addressed solely to the Office of Contract Administration via email: AOT.ConstructionContractingInquiry@vermont.gov. All inquiries must be received by 4:30pm on Wednesday, January 17, 2024. All bidders on this project must hold both current annual Prequalification with the Vermont Agency of Transportation through the "Contractor's Experience Questionnaire and Financial Statement" and unconditioned project-specific approval through the "Standard Form - Request for Proposal" CA-82 form The estimates of quantities are not guaranteed, but are given as a basis for the comparison of bids. The right is reserved to reject any or all bids, to waive any formality, and any and all technicalities in bids, and to accept such bids as may be deemed in the best interest of the awarding agency. VT DOT - Springfield-Hartland IM Surf(68) *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. WORK TO BE PERFORMED UNDER THIS CONTRACT INCLUDES SURFACE PREPARATION INVOLVING PATCHING, POT HOLE REPAIR, CRACK SEALING, FINE-MILLING AND INLAYING WITH BONDED WEARING COURSE ON THE EXISTING INTERSTATE TYPICAL, PAVEMENT MARKINGS, GUARDRAIL, AND OTHER HIGHWAY RELATED ITEMS. This work shall consist of applying a surface treatment consisting of a polymer modified emulsified asphalt coat followed immediately with a bonded wearing course and in conformance with the lines, grades, thicknesses, and typical cross-sections shown on the Plans or established by the Engineer.