Site work and paving for a mixed-use development in Plainfield charter Township, Michigan. Completed plans call for site work for a road / highway; for paving for a road / highway; sidewalk / parking lot; and sidewalk / parking lot.

Reference Number 0000339554 Location: Bingham Court, Bowdoin Pines Place, Kittery Drive Alpine TWP Parking Lot (See Maps) Length of Project: 0.59 Miles Question Deadline 01/30/2024 at 8:30 AM ET Type of Construction: Full Depth Mill & Fill - 3.5" (Streets) Full Depth Mill & Fill - 3.0" (Parking Lot) Streets: The contract will consist of lowering all manholes, full depth cold milling HMA, placing new base course HMA 3EML, Mod. 2.0" (Tier 2), adjusting structures, and then placing a final course HMA 5EML 1.5" (Tier 2). The Kent County Road Commission Maintenance Department will be doing any and all prep work prior to milling and all restoration work after paving. Parking Lot: The contract will consist of full depth cold milling HMA, placing new base course HMA 5EML, 1.5" (Tier 2), and then placing a final course HMA 5EML 1.5" (Tier 2). The Kent County Road Commission Maintenance Department will be doing any and all prep work prior to milling and all restoration work after paving. The contractor should schedule this project in such a way that inconvenience to the residents is kept to a minimum. Once the pavement is milled, base course paving should be set up for that day or the following day so that residents have access to their driveways. STARTING DATE: This contract cannot begin before May 1, 2024, for TWP Parking Lot & July 8, 2024, for Streets Completion Date: October 15, 2024 General Requirements - Insurance Required Buyer Requires E-Bonding - Bid Bond 5 % - Performance Bond 100 % - Payment Bond 100 % *The Board reserves the right to reject any and all bids or to waive irregularities therein, and to accept any bids which, in the opinion of the Board, may be most advantageous and to the best interest of the County. The undersigned hereby proposes to furnish all necessary machinery, tools, apparatus and other means of construction, do all the work, furnish all the materials except as otherwise specified herein; and, for the unit price or lump sums named in the itemized bid, to complete the work herein described in strict accordance with the plans therefore and in strict conformity with the requirements of the 2020 Standard Specifications for Construction of the Michigan Department of Transportation and such other special provisions and supplemental specifications as may be a part of this proposal. This work consists of electing to furnish low-tracking bond coat emulsified asphalt in lieu of standard bond coat. Ensure all work is in accordance with section 904 of the Standard Specifications for Construction and applicable special provisions, except as modified herein. The low-tracking bond coat emulsified asphalt must conform to approved acceptance test methods and procedures described in the Materials Quality Assurance Procedures Manual. No deviations to acceptance test methods and procedures will be allowed