Site work for an educational facility in Athens, Alabama. Completed plans call for site work for a educational facility.

Bids must be submitted on proposal forms furnished by the Architect (Engineer) or copies thereof. Allbidders bidding in amounts exceeding that established by the StateLicensing Board for General Contractors must be licensed under theprovisions of Title 34, Chapter 8,Code of Alabama, 1975, and mustshow evidence of license beforebidding or bid will not be receivedor considered by the Architect (Engineer); the bidder shall show suchevidence by clearly displaying hisor her current license number onthe outside of the sealed envelopein which the proposal is delivered.The Owner reserves the right toreject any or all proposals and towaive technical errors if, in theOwner's judgement, the best interests of the Owner will thereby bepromoted. Bid Documents may be obtainedfrom the Architect (Engineer) uponpurchase of $ 25 per set. A. Extent of earthwork is indicated on drawings. 1. Rough grading 2. Preparation of subgrade for building slabs and walks is included as part of this work. 3. Drainage fill course for support of building slabs is included as part of this work. B. Excavation for Mechanical/Electrical Work: Refer to Division 15 and 16 sections for excavation and backfill required in conjunction with underground mechanical and electrical utilities and buried mechanical and electrical appurtenances; not work of this section. C. Codes and Standards: Perform excavation work in compliance with applicable requirements of governing authorities having jurisdiction. D. Testing and Inspection Service: A. The Owner will select a firm for soil testing and inspection service for quality control testing during earthwork, and Owner to pay costs. B. Retesting of rejected materials and installed work shall be done at the Contractors expense. C. Referenced Standards: Where the term Referenced Standard is used in these Project Specifications, it shall be interpreted as referring to the current edition of Standard Specifications for Highway Construction, 2018 or latest edition of Alabama Department of Transportation. Referenced Divisions of the Standard are hereby made a part of this Project Specification insofar as they may be termed applicable. In no case will requirements for Method of Measurement and Basis of Payment be considered as applicable to this Project Specification