Site work and paving for a road / highway in Carbondale, Colorado. Completed plans call for site work for a road / highway; and for paving for a road / highway.

As of April 26, 2024 project was awarded to Gmco Corporation, but awarded amount is not available. The Chip Seal Program consists of applying asphaltic binder and aggregate meeting CDOT No. 8 specifications on approximately 37,005 square yards of street surface. All work shall meet, at a minimum, the Town of Carbondale Chip Seal Surfacing Specifications. A map and a list of the streets scheduled to be chip sealed are included in the specifications and contract documents. The Town has a limited budget for the 2024 Chip Seal program and therefore reserves the right to adjust the quantities to fit within the financial limits of the program based on the bids received. The listed square yard measurements are estimates for bidding purposes only and the final square yardage will be determined at the end of the project. Work shall consist of all labor, materials, equipment, traffic control and safety devices required for chip sealing of the roads listed in the construction schedule. All work shall be done in accordance with the 2019 Colorado Department of Transportation "Standard Specifications for Road and Bridge Construction" unless modified herein. The Bidder is required to examine carefully the site of the proposed work. They shall satisfy themselves as to the character, quality and quantities of work to be performed, materials to be furnished, and as to the requirements of the specifications. Work on this project cannot begin prior to May 13, 2024, and must be complete by June 30, 2024.