Renovation of an educational facility in Wallkill, New York. Completed plans call for the renovation of a educational facility.

As of March 20, 2024, this project has not yet been awarded. A timeline for award has not yet been established. NOTICE IS HEREBY GIVEN, that sealed Bids, in duplicate, are sought and requested by the Board of Education, Wallkill Central School District Board of Education (hereinafter called "Owner"), for the Reconstruction to Wallkill Senior High School, John G. Borden Middle School, and Plattekill Elementary School. A scanned copy of the deposit check can be emailed to projects@revplans.com. Once the scanned copy of the executed deposit check is received, Bidding Documents will be shipped. Mail checks to Lohrius Blueprint, 226 Newtown Road, Plainview, New York 11803. Plan deposit isrefundable in accordance with the termsin the Instructions to Bidders. Any bidder requiring documents to be shipped shall make arrangements with the printer and pay for all packaging and shipping costs(either by providing FedEX/UPS account number or being charged a flat rate by the printer). As bid security, each Bid shall be accompanied by a certified check or Bid Bond made payable to the Owner, in accordance with the amounts and terms described in the Instructions to Bidders. The Owner requires Bids comply with bidding requirements indicated in the Instructions to Bidders. The Owner may, at its discretion, waive informalities in Bids, but is not obligated to do so, nor does it represent that it will do so. The Owner also reserves the right to reject any and all Bids. The Owner will not waive informalities which would give one Bidder substantial advantage or benefit not enjoyed by all affected Bidders. Bids may not be withdrawn before 45 days following the Bid opening thereof, unless an error is claimed by the Bidder in accordance with the Instructions to Bidders. John G. Borden Middle School 62-18-01-06-0-002-015 1. Includes HVAC Equipment, Piping, ductwork, control systems, plus other construction operations traditionally recognized as heating, ventilating and cooling work. This includes, but is not limited to, all work shown on the drawings, unless noted otherwise. It also includes Administrative and coordination responsibilities. a. Drawings 1) Mechanical 2. Coordination: a. Coordination with the work of all the other contractors. 1) Drawings a) All 3. Demolition a. Provide demolition of all HVAC equipment, controls, and piping as shown and as required per the Contract Documents. b. Removals and storage in a manner to re-install after work by others has been performed as per the Contract Documents. c. Provide Coordination with other trades. Specific coordination with the General Work Contractor, Roofing Contractor & Electrical Contractor. d. Removals shall be performed per the Milestone schedule e. Provide layout for Roofing Contractor and General Work Contractor to perform required removals. f. Roof penetrations. HVAC Contractor to locate all locations and sizes of equipment curbs. Provide mechanical equipment curbs to the Roofing Contractor. Roofing Contractor to provide all necessary penetrations, flashing and roofing. 4. Temporary Facilities a. Provide Temporary Facilities indicated as Work of this Contract in Division 1 Section 01 50 00, "Temporary Facilities and Controls" 5. Construction: a. Note that HVAC equipment will be provided under a separate contract as noted on the drawings. Delivery, storage, and Installation is by this contractor. Scheduling of delivery will be the responsibility of this contract and coordinated with the Construction Manager and the Commissioning company. b. Provide all work indicated on the contract drawings c. Provide and install all new hot water supply and return piping. d. Provide and install ductwork and associated components per the drawings and specs e. Install Air Handling Unit and Roof top units with heat recovery, unless otherwise noted. f. Provide and install all refrigerant piping and hydronic piping to all units g. Install unit heaters. h. Install remote condensing units. i. Where called on drawings provide re-installation of unit ventilators and finned tube. Any damage during removals will be the responsibility of this contractor to repair/replace at their own cost. j. Provide and install all insulation, painting and labeling of new and modified piping, ductwork and equipment. k. Provide all controls and energy management systems. Coordinate with owners to provided required system. l. Provide proper roofing supports and accessories for equipment on roof. m. Provide all testing, adjusting and balancing of all new and existing modified HVAC systems. n. All fees required for inspections and permits. o. Provide support framing for HVAC equipment, e.g., mechanical equipment curbs. p. Furnish access doors for HVAC access as indicated above (to be installed by GC) q. Provide firestopping and sealing all HVAC penetrations r. Furnish motor controllers/disconnects to Electrical Contractor for installation and wiring. s. Provide owner training / commissioning of equipment and controls t. All HVAC removals as shown and required for completion of the work. Submit requests for Bidding Document interpretation to the Architect, in writing using the provided Pre-Bid Request for Interpretation Form, at least five working days prior to the Bid opening. Question Deadline 02/29/2024 2) Secondary Contact - only if primary is not available: Mr. Brian Devincenzi, Assistant Superintendent for Support Services, 1500 State Route 208, Wallkill, New York, 12589, Phone (845) 895-7102.