Renovation of a multi-residential development in Canmore, Alberta. Completed plans call for the renovation of a multi-residential development.

The project scope of work will align with the required access to occupied units, the working duration for each bathroom respectively is from 8:00am to 5:00pm on a per-day basis. Full, unobstructed access to units is not permitted, proponents will have to adhere to the pre-determined window for access. In typical instances, access to four (4) units at one time will be permitted to allow trades to flow from one unit to the next, per a mutually agreed schedule. There are a total of 24 units that require upgrades per the outline in this RFP. Scope of work: Demolition of en-suite bathroom showers, shower doors, drywall and flooring It is imperative that the sink, light fixture, remaining electrical items be kept in working condition as they do not form a component of this project and are not planned to be upgraded Remove & dispose of existing drop in shower, glass doors, hinges. Remove but retain existing plumbing rough-in equipment and drains, as required for re-installation of the new drop in tub Install new drop-in fiberglass, freestanding tub to be confirmed by CCHC. A rod and curtain system shall be provided Connect drains to existing rough-un and install new drain fixture to match existing fixtures It should be noted that the units located on the ground level of the building are on a slab on grade and access is limited New Schluter system surrounding exposed drywall New subway tile from tub edge to underside of ceiling with white grout, to be confirmed by CCHC Install new tile flooring to match existing in the bathroom up to new tub location Re-wire bathroom fan to existing light switch Paint walls to match existing with two coats of paint, colour to be confirmed by CCHC