Site work and renovation of a mixed-use development in Calabasas, California. Completed plans call for site work for a water / sewer project; for the renovation of a sidewalk / parking lot; and sidewalk / parking lot.

Quote: It is intended that the successful firm will enter into a fixed price agreement with the District for the services requested in the Scope of Work. Scope of Work o Vendor shall prepare all piping, meters, valves and motor housing for complete priming of substrate and apply two (2) finish coats (minimum 10 mil thickness) of epoxy paint in colors approved by the District. (Exhibit A) o All areas not receiving coatings will be protected from overspray including all fittings and lines (brass and stainless steel), gauges, electrical components, actuators, badges and identification signage. o Preparation for coating will include removal of grease/oil, loose chipping and pealing epoxy, rust, calcium and scale. o Grinders used in preparation for coating will be fitted for 3M spark less grinding system (or equivalent) with EDCO Hepa Vac. o All surfaces will be clean and dry prior to application of the epoxy paint. o Lead and Potable water certification. o General knowledge of electrical motors and panels is recommended. o Fire hydrants must be prepared by scraping and removing loose chips, peeling paint, rust, and scaling. Two coats of Safety Yellow paint will be applied to each hydrant to a (minimum 10 mil thickness) If appurtenances are included in the bid the preparation of them, they must be the same as fire hydrants. Two coats of paint will be applied as the finish with approval of the paint colors in advance by the District before applying them. If you have any questions or need additional information regarding this RFQ, please contact Ken Kuhlman at kkuhlman@lvmwd.com. McCoy Pump Station Three Springs Pump Station 10 to 20 System Hydrants 24282 Parkway Calabasas 2000 Kirsten Lee Drive Located throughout the District