Site work and paving for a road / highway in Ross Township, Pennsylvania. Completed plans call for site work for a road / highway; and for paving for a road / highway.

For Resurfacing of a Certain Section of State Highways in Luzerne County: Ross, Lake, and Lehman Townships, Commonwealth of Pennsylvania, State Route 0118, Section M24. Plains Township, Commonwealth of Pennsylvania, State Route 2020, Section M23. Conyngham and Newport Townships, Commonwealth of Pennsylvania, State Route 3004, Section M23. The Project Being Situated as Follows: From a Point on Sr 0118 at Segment 0190 Offset 1457 to a Point Approximately 29,392 Feet (5.57 Miles) Along Sr 0118 at Segment 0290 Offset 2580. From a Point on Sr 2020 at Segment 0070 Offset 1964 to a Point Approximately 8,183 Feet (1.55 Miles) Along Sr 2020 at Segment 0100 Offset 2861. From a Point on Sr 3004 at Segment 0010 Offset 0000 to a Point Approximately 23,239 Feet (4.40 Miles) Along Sr 3004 at Segment 0090 Offset 2473. The Project Includes Milling, Paving, Guide Rail Replacement, Base Repair, Driveway Adjustments, Inlet Top Replacement, and Inlet Installation on Sr 0118, 2020, and 3004. Project Cost Range: $5,000,000.00 - $7,499,999.99 Federal Project Status: Non - Federal (100% State) Structure Work: 0.00% Pre-bid Meeting: None Wage Rates: Yes Prequalification Requirement: Yes State Type of Work: Resurfacing/overlays Responses to questions on this page are for informational and clarification purposes. Official changes to the proposal will be made via an Addendum. The deadline for submitting questions is 72 hours before the let date and time. For Emergency projects, the deadline is reduced to 19 hours before the let date and time. PennDOT - Luzerne County SR 118 Resurfacing *The value for this project is based on a financial range. The value is listed as the highest possible cost from the range provided by a stakeholder or official project document. This work is the construction of non-polymer modified thin lift wearing course of plant-mixed, dense-graded asphalt concrete with 6.3 mm Nominal Maximum Aggregate Size (NMAS), placed on a prepared surface.