Site work and outdoor lighting for a road / highway in Riverton, Utah. Completed plans call for site work for a road / highway; and for outdoor lighting for a road / highway.

Refurbish, meaning sandblast and paint an existing pole, banner arm and fixture head. Sandblasting will be done to the SSPC-SP-10 Near White Metal Blast Standards and then paint using an application of an epoxy primer that has a minimum of 50% solids +/- 2%, and a top coat application of an acrylic-aliphatic urethane. Paint color is to be black paint, semi gloss #PPG95-8500black. Paint could be brushed or sprayed. Paint thickness is: 4 to 5 mils DFT on the epoxy primer. 2 to 3 mils DFT on the urethane top coat. Contractor is to refurbish on-location, without removing the pole, or off-location by removing the pole, taking to contractors booth, refurbishing and reinstalling within 48 hours. Bidders should know that the last time we had a contractor refurbish street lights the contractor could not remove the poles because the bolts were rusted to the pole. If bidding to remove and refurbish off-location, a licensed electrician must do the disconnect and re-connect. Poles are to be removed such that every other pole is left in working condition while those removed are being refurbished, when refurbished and reinstalled the ones that were left may be removed and refurbished. The exposed wiring must be protected from vandalism or exposure to non-qualified individuals. All liability for vandalism or loss will be the contractor's responsibility. The contractor is to coordinate with City Staff on the removal and delivery prior to start. Three (3) year warranty on paint. Quote for Refurbishing 26 Street Lights at the following locations: 5 lights on12600 south, south side of the road. See attached. 9 lights on 2700 west, from 12627 south to 13600 south. See attached. 2 lights on 1700 west. See attached. 7 lights on 1300 west, from 11692 south to 12257 south. See attached. 3 lights on 18000 west. See attached Questions of a technical nature regarding this project or the specifications should be directed to Craig Calvert at 801-208-3175.